|
Foto e specifiche Black & Decker GR3800 |
Facilità d'uso
D) Lift the flap (15) and place the grass bag (6) over the lugs. 14 ENGLISH Use Warning! Let the appliance work at its own pace. Do not overload. Adjusting the height of cut (fig. E) The height of cut is adjusted by the central height adjust mechanism. Warning! Disconnect the appliance from the mains and wait until the blade has stopped rotating before proceeding. Set the wheels to the desired height setting with the height adjustment lever (7). Switching on and off Switching on Hold the handle with both hands and tilt it slightly downwards to raise the front of the appliance. Keep the lock-off button (3) pressed and pull the on/off switch (2) towards you. Release the lock-off button. Let the appliance return to its working position. Switching off PTo switch the appliance off, release the on/off switch (2). Warning! Never attempt to lock a switch in the on position. Mowing (fig. F & G) We recommend to use your mower as outlined in this section in order to achieve optimum results and to reduce the risk of cutting the mains cable. Place the bulk of the mains cable on the lawn, close to the starting point (position 1 in fig. F). Switch the appliance on as described above. Proceed as shown in fig. F. Move from position 1 to position 2. Turn right and proceed towards position 3. Turn left and move towards position 4. Repeat the above procedure as required. Warning! Do not work towards the cable as shown in fig. G. Emptying the grass bag When you see loose grass scattering from beneath the mower, empty the grass bag. Warning! Never use the appliance without the grass bag. Carrying the mower (fig. H) Warning! Disconnect the appliance from the mains and wait until the blade has stopped rotating before proceeding. The mower can be carried using the convenient carry handles (9). Hints for optimum use If the grass is longer than approximately 10 cm, make two cuts to obtain a better finish. First mow at maximum height of cut, then use a low or medium height of cut. In order to achieve optimum results, only mow dry grass. Maintenance Your Black & Decker appliance has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper appliance care and regular cleaning. Keep the appliance clean and dry. Regularly clean the ventilation slots with a clean, dry paint brush. Regularly use a blunt scraper to remove grass and dirt from the appliance. To clean the appliance, use only mild soap and a damp cloth. Never let any liquid get inside the tool and never immerse any part of the tool into liquid. Do not use any abrasive or solvent-based cleaner. Blade maintenance Regularly remove grass and dirt from the blade. At the beginning of the gardening season, carefully examine the condition of the blade. If the blade is very blunt, sharpen or replace the blade. If the blade is damaged or worn, fit a new blade as described below. Replacing the blade (fig. I) A replacement blade is available from your Black & Decker dealer. Cat no. A6243 can be used on the GR3800. Warning! Observe the following precautions: Disconnect the appliance from the mains and wait until the blade has stopped rotating before proceeding. Be careful not to cut yourself. Use heavy-duty gloves or a cloth to grip the blade. Only use the specified replacement blade. Do not remove the impeller (16) for any reason. To replace the blade: Turn the appliance onto its side. Grip the blade (17) with one hand. Use the spanner supplied to loosen and remove the blade nut (18). Note: When fitting a blade, the text on the blade must be facing the user. Replace the blade (17). Refit the washer (if fitted before) and nut (18). Securely tighten the blade nut. 15 ENGLISH Troubleshooting If your appliance seems not to operate properly, follow the instructions below. If this does not solve the problem, please contact your local Black & Decker repair agent. Warning! Before proceeding, remove the plug from the socket. Motor buzzes but blade does not move Carefully remove any obstructions from the blade. No noise and blade does not move Check that the power cables are properly connected. Check the mains fuses. Protecting the environment Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Separate collection of used products and packaging allows materials to be recycled and used again. Reuse of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Service Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker S...
Questo manuale è adatto anche per i modelli :falciatrici - 661817-00 (1.32 mb)