Log:
valutazioni - 1, GPA: 4 ( )

Istruzioni per l'uso Craftsman, Modello 28903

Produttore : Craftsman
File Size : 7.4 mb
File Nome : a2abf4a6-3417-4663-99bc-e346b2df1d77.pdf
Lingua di insegnamento: enes
Vai a scaricare



Facilità d'uso


-For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height. TO OPERATE MOWER "Your tractor is equipped with an operator presence sensing switch_ Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine, You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills. 1, Select desired height of cut. 2, Start mower blades by engaging at tachment clutch control. TO STOP MOWER BLADES disengage attachment clutch control. _CAUTION" Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place. _, /Attachment Lift )2Z'LeverPosition• Choosetheslowestspeed before starting High Attachment k.L_c, tl _ :: Clutch Leve r -_:[_ _h'_i. ?L---___q,_, 'Eng.aged_._ ._C?Jf-iii ./, Pos"ition Position--__--/ i_J _//(_ "_'_: ,/_Deflector OPERATING 1N REVERSE "Your tractor is equipped with a Reverse Operation System (ROS)_ Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless the ignition key is placed in the ROS "ON" position° _WARNING: Backing up with the attachment clutch engaged while mowing is strong ly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless 1, Depress clutch/brake pedal atl the way down and hold. 2. With engine running, turn ignition key counterclockwise to ROS "ON" position. 3. Look down and behind before and while backing up. 4. Move gear shift lever to reverse (R) position and slowly release clutch/brake pedal to start movement. 5. When useofthe ROS is no longer needed, turn the ignition key clockwise to engine "ON" position. ROS "ON" Position Engine "ON" Position (Normal Operating) TO OPERATE ON HILLS _WARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide at the back of this manual. up or down hills. • Avoid stopping or changing speed on hills. • If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake. • Move gearshift lever to Ist gear Be sure you have allowed room for tractor to roll slightly as you restart movement. . To restart movement, slowly release parking brake and clutch/brake pedal. • Make all turns slowly. TO TRANSPORT o Raise attachment lift to highest position with attachment lift control • When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position. = Do not push or tow tractor at more than five (5) MPH° NOTE: To protect hood from damage when transporting your tractor on a truck or atrailer, be sure hood is closed and secured to tractor° Use an appropriate means of tying hood to tractor (rope, cord, etc.). absolutely necessary° 14 TOWING CARTS AND OTHER ATTACH MENTS Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing° Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor. BEFORE STARTING 'THE ENGINE CHECK ENGINE OIL LEVEL The engine inyour tractor has been shipped, from the factory, already filled with summer weight oil. 1.. Check engine oil with tractor on level ground. 2, Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until "FULE' mark on dipstick is reached. Do not overt_ill, • For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual). • To change engine oil, see the Maintenance section in this manual. ADD GASOLINE • Fill fuel tank to bottom of filler neck. Do not overfill, Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life) oDo not mix oil with gasoline_ Purchasefuel in quantitiesthat can be used within 30 days to assure fuel freshness. _CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. IMPORTANT: When operating in temperatures below 32°F(00C), use fresh, clean winter grade gasoline to help insure good cold weather starting. CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before s...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie