For all correspondence and spare parts orders, always include the 10-digit part number (TYP) from the nameplate of the machine! Blade Maintenance Stop, remove plug from the power supply and remove the grassbox. Turn the machine on its right side and inspect the blade; if blunt or damaged, replace. Use the following procedure to remove and replace the blade. Hold the blade 17 using gardening gloves (not provided) use a spanner (not provided) to remove the blade bolt 16, blade washer 18 (ROTAK 34/
¦ Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance. Mow only in daylight or in good artificial light. ¦ Avoid operating the lawnmower in wet grass, where feasible. Walk, never run. ¦ Never operate the appliance with defective guards or shields, or without safety device, for example deflectors and/or grass catchers in place. Mowing on banks can be dangerou
B For products not sold in GB: WARNING: For safety, it is essential that the mains plug 5 attached to the product is fitted to the power supply cable 15. The couplings of connection leads must be protected against splashes and the coupling sockets on the leads must be made of rubber or coated with rubber. Fixing means for the connection leads must be used. The connection lead must be inspected for signs of damage at regular intervals and may only be used if in perfect condition. Products sold in
Box 66 Clayton 3168 Clayton/Victoria . .................................................. +61 (0)1 / 800 804 777 Fax .................................................. +61 (0)1 / 800 819 520 E-Mail: CustomerSupportSPT@au.bosch.com New Zealand Robert Bosch Limited 14-16 Constellation Drive Mairangi Bay Auckland New Zealand . ........................................................ +64 (0)9 / 47 86 158 Fax ........................................................ +64 (0)9 / 47 82 914 Declaration of