valutazioni - 5, GPA: 4
(
)
)
|
Facilità d'uso
• Operation • Maintenance • Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. FORM NO. 40258 (06/06) TABLE OF CONTENTS SAFETY RULES..............................................................2 CARTON CONTENTS.....................................................3 HARDWARE PACKAGE ..................................................3 ASSEMBLY......................................................................4 OPERATION....................................................................6 STORAGE .......................................................................6 MAINTENANCE ..............................................................7 REPAIR PARTS ILLUSTRATION....................................8 REPAIR PARTS LIST ......................................................9 PARTS ORDERING/SERVICE ....................... Back Cover WARRANTY ONE YEAR FULL WARRANTY When operated and maintained according to the instructions supplied with it, if this sweeper fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair (or replacement if repair proves impossible). If this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179 MODEL NUMBER: 486.240362 SERIAL NUMBER: __________________ DATE OF PURCHASE: __________________ The model number and serial numbers will be found on a decal attached to the sweeper. You should record both the serial number and the date of purchase and keep in a safe place for future reference. SAFETY LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT SAFETY PRECAUTIONS. IT MEANS — ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED. CAUTION: VEHICLE BRAKING AND STABILITY MAY BE AFFECTED WITH THE ADDITION OF AN ACCESSORY OR AN ATTACHMENT. BE AWARE OF CHANGING CONDITIONS ON SLOPES. Do not allow anyone to operate the sweeper without proper instructions. Do not permit children to operate sweeper. Eye protection should be worn while operating sweeper. Do not push or tow sweeper too close to a fire. Do not attempt to remove wire or string wrapped around brush while brush is rotating. Operate sweeper at reduced speed on rough terrain, in ditches and on hillsides to prevent tipping and loss of control. Stay alert for holes or other hidden hazards. This sweeper is not meant for street or highway use. Watch for traffic when sweeping near roadways. Keep all nuts, bolts and screws tight to be sure equipment is in safe working condition. Sweeper should be stopped and inspected for damage after striking a foreign object and damage should be repaired before operating the equipment. Follow maintenance instructions as outlined in this manual. 2 CARTON CONTENTS 1. Sweeper Housing Assembly 4. Lower Handle Leg Stand (2) 2. Hopper Bag 5. Short Bag Rod 3. Upper Handle 6. Long Bag Rod HARDWARE PACKAGE Ref.Description Qty.Ref.Description Qty.Ref. Description Qty. No.No. A Hex Bolt, 1/4-20 x 1-1/4" 4A Hex Bolt, 1/4-20 x 1-1/4" 4A Hex Bolt, 1/4-20 x 1-1/4" 4 B Flat Washers 1/4" I.D.4B Flat Washers 1/4" I.D.4B Flat Washers 1/4" I.D.4B Flat Washers 1/4" I.D. 4 C Hex Lock Nuts 1/4-20 8C Hex Lock Nuts 1/4-20 8C Hex Lock Nuts 1/4-20 8C Hex Lock Nuts 1/4-20 8 D Bag Rod Clips 4D Bag Rod Clips 4D Bag Rod Clips 4D Bag Rod Clips 4 E Curved Head Bolts 1/4-20 x 1" 4E Curved Head Bolts 1/4-20 x 1" 4E Curved Head Bolts 1/4-20 x 1" 4E Curved Head Bolts 1/4-20 x 1" 4 F Palnut 1/4" 2F Palnut 1/4" 2F Palnut 1/4" 2F Palnut 1/4" 2 G Plastic Caps (for bag rods) 2G Plastic Caps (for bag rods) 2G Plastic Caps (for bag rods) 2G Plastic Caps (for bag rods) 2 H Plastic Caps (for leg stands) 2H Plastic Caps (for leg stands) 2H Plastic Caps (for leg stands) 2H Plastic Caps (for leg stands) 2 (NOT SHOWN FULL SIZE) 3 ASSEMBLY TOOLS REQUIRED FOR ASSEMBLY (1)Phillips Screwdriver (1)Adjustable Wrench (1) 7/16" Open End or Box Wrench 1. Assemble the two Handle Leg Stand Tubes to the Sweeper Housing, using two hex bolts 1/4-20 x 11/ 4" long, flat washers and 1/4-20 hex lock nuts, per handle. See figure 1. Only hand tighten at this time. FIGURE 1 2. Assemble the Upper Handle Tube over the Handle Leg Stand Tubes. See figure 2. Align holes in handle and assemble the Bag Rod Clips to the handle as shown and fasten with curved head bolts and hex lock nuts. FIGURE 2 3. Now tighten the four bolts from step 1. 4. Assemble a bag rod clip to the inside of each lower handle tube using a curved head bolt secured down against the clip using a 1/4" lock nut. The open end of the clips should face towards the sweeper housing. See figure 3. FIGURE 3 5. Slide the long bag rod (28-1/2" long) through the stiched bag flap on the top of the hopper bag as shown in figure 4. 6. Slide the short bag rod (25-1/2" long) through the stiched ba...