Log:
valutazioni - 5, GPA: 3.6 ( )

Istruzioni per l'uso Sony, Modello 160GB Playstation 3 CECH-2501A

Produttore : Sony
File Size : 2.46 mb
File Nome :
Lingua di insegnamento: enes
Vai a scaricare



Facilità d'uso


Hints . When using an HDMI cable to connect the system to the TV, a screen for changing the video output resolution will be displayed during initial setup. If you select [Yes] on the screen and then press the button, the optimal output resolution will be selected automatically. . For details on entering text, see "Using the on-screen keyboard" ( page 4). . Settings entered during initial setup can be changed under (Settings) or (Users). For details, refer to the online user’s guide (Getting started Video output on the PS3™ system Getting started Video output on the PS3™ system The PS ™ system can output two types of resolution: HD and SD. Refer to the instruction manual for the TV in use to check which video mode is supported. HD (High Definition) SD (Standard Definition) 1080i 720p 480p 480i *2 16:9 16:9 16:9 4: 16:9 4: Video mode *1 1080p Aspect ratio 16:9 *1 This number indicates the number of scan lines. Note that "i" stands for "interlace" and "p" stands for "progressive". Using progressive results in high-quality video with minimal flickering. *2 The video output setting on the system will display as [Standard (NTSC)]. Screens showing the difference in resolution HD screen SD screen Video output cable types US Video output cable types US The resolution displayed on the TV varies depending on the input connectors on the TV and the type of cable in use. Select a cable to match the TV in use. Getting Cable type Input connector on the TV Supported video modes*. HDMI Cable*. (sold separately) HDMI IN connector 1080p / 1080i / 720p / 480p Component AV Cable (sold separately) Component VIDEO IN connector Y L RPR/CRPB/CB COMPONENT VIDEO IN AUDIO IN 1080p / 1080i / 720p / 480p / 480i* S VIDEO Cable (sold separately) S VIDEO IN connector S VIDEO L-AUDIO-R 480i* AV Cable (supplied) VIDEO IN connector (composite) VIDEOL-AUDIO-R480i* *1 Depending on the type of TV or content to be played, some video modes may not be supported. If a device that is not compatible with the HDCP (High-bandwidth Digital Content Protection) standard is connected to the system using an HDMI cable, video and/or audio cannot be output from the system. Copyright-protected Blu-ray video discs can only be output at 1080p using an HDMI cable connected to a device that is compatible with the HDCP (Highband-width Digital Content Protection) standard. *2 Connect the system to the TV using an HDMI cable (sold separately). An HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio. * The video output setting on the system will display as [Standard (NTSC)]. Getting started Getting started Depending on the type of cables and the connectors used, you may need to adjust the PS ™ system's video output settings to display video at HD resolutions ( page 16) on a TV. If video is not displayed . Switch the video input of the TV to match the input connector used to connect to the system. . Turn off the system, and then turn it on again by pressing the power button for at least five seconds (until the system beeps twice). The video output setting will be reset and video will be output at standard definition (SD) resolution. 1 Select (Settings) (Display Settings) [Video Output Settings], and then press the button. 2 Select the input connector ( page 17) in use on the TV, and If you select [HDMI], you will have the option to choose [Automatic] or [Custom] on the next screen. In most cases, select [Automatic], and video output settings will be completed automatically. If you select [AV MULTI / SCART], you must choose the type of output signal on the next screen. In most cases, select [Y Pb/Cb Pr/Cr]. 3 Confirm the screen, and then press the button. If you changed the connector in step 2, a screen for confirming the change will be displayed. 4 Confirm the settings, select [Yes], and then press the button. If you changed the connector in step 2, a screen for confirming the settings will be displayed. 5 Select the resolutions supported by the TV, and then press the button. The resolution displayed on the TV varies depending on the input connector and the type of cable used ( page 17). The highest resolution you selected will be used for video output. Depending on the connector selected in step 2, this screen may not be displayed. Confirm the settings, select [Yes], and then press the button. 9 Adjust audio output settings. Depending on the connector selected in step 2 and the resolutions selected Continue on to adjust audio output settings. Adjust settings to match the TV in step 5, this screen may not be displayed. or audio device in use. US Getting 7 Select the type of TV, and then press the button. If you selected [Standard (NTSC)] or [480p] in step 5, a screen for selecting the TV screen size will be displayed. Adjust the setting to match the TV in use. If you selected [720p] or a higher resolution in step 5, the TV type will automatically be set to 16:9 and the screen for se...

Questo manuale è adatto anche per i modelli :
Console di gioco - 160GB Playstation 3 4-198-819-12 (2.46 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie