valutazioni - 1, GPA: 4 ( )

Produttore : Sony File Size : 2.48 mb File Nome : CECH-2101A_2101B_3.10_1.pdf Lingua di insegnamento:

Hint You may not be able to use the backup utility to restore some data. For important data that cannot be backed up, it is recommended that you selectively copy or move the data to a USB storage device before you use the backup utility feature. For details on the backup utility feature, refer to the online user’s guide (Backing up selected data The following file types saved on the system’s hard disk can be copied or moved to a USB device. Select the file, press the button, and then select [Copy] or [Move] from the options menu. For some types of video files, you may need to select [Back Up] instead. Saved data from games; video, music USB mass storage device or photo files (USB flash drive, etc.) File type Back up destination Hints . Some data cannot be copied, moved or backed up. . By using a card reader/writer (USB connector type, sold separately), you can back up files saved on the hard disk to storage media such as a Memory Stick™ or an SD Memory Card. Replacing Caution . For safety reasons, be sure to turn off and unplug the system before attempting to remove the hard disk. . The system may not be stable when placed upside down. Be careful not to injure yourself when removing the screw. 1 Press the power button to turn off the system. The power indicator turns solid red and the system enters standby mode. 2 Unplug the AC power cord, and then disconnect the other cables from the system. For safety reasons, remove the plug for the power cord from the electrical outlet, and then detach the other cables. 37 ard disk US Removing the hard disk Replacing the hard disk Replacing the hard disk 3 Place the system upside down on a soft, dry cloth, and then 5 Remove the hard disk. open the screw cover. Pull the handle upwards, and then pull out the hard disk from the system. Use the notch located above the screw cover to slightly pull up the cover. Then rotate the cover as shown in the diagram. If the cover is hard to pull up, insert a tool such as a flathead screwdriver in the notch and gently pull the cover up. .... Screw cover 4 Remove the screw that fastens the hard disk in place, and then remove the HDD bay cover. . Remove the blue screw with an appropriate crosshead screwdriver. . Slide the HDD bay cover to the left, and then remove the cover. HDD bay cover Notices The hard disk is a sensitive piece of equipment and should be handled with care at all times. To help prevent software or data loss or corruption, or damage to the hard disk, carefully follow the precautions listed below: . Do not throw or drop the system or hard disk, or otherwise expose either device to strong vibrations or strong physical impact. . Do not allow liquid or small particles to get into the system or hard disk. . Do not touch the connectors or insert foreign objects into the connectors. . Do not place the system or hard disk close to magnetic fields such as those produced by magnets or loudspeakers. Also, do not place devices that may be sensitive to magnetic forces (such as a wrist watch or a credit card) near the hard disk. . Do not put heavy objects on the hard disk. . When handling the hard disk, hold it only by the edges or metal frame. . The hard disk is sensitive to static electricity. Ensure that proper handling methods are used when installing the hard disk. . Store in a cool, dry location. Caution For safety reasons, be sure to turn off and unplug the system before attempting to replace the hard disk. When replacing the hard disk, follow the procedure below to remove the metal frame. 1 Using a crosshead screwdriver, remove the screws (4 places). 2 Hold the hard disk by the edges, and then turn it over. Grasp firmly by the opening on either side to prevent slipping. 3 Remove the hard disk from the metal frame. .... US Replacing disk 4 Place the replacement hard disk on the metal frame for the PS3™ system’s hard disk, and then attach using the screws (4 places). Do not overtighten the screws. 5 Install the hard disk in the system. Refer to the instructions in "Removing the hard disk" ( page 37) and follow the steps in reverse order when installing. Be sure to fully insert the hard disk in the HDD bay. 6 Reinstall the system software. After the hard disk has been replaced, the system software must be reinstalled ( page 40). Replacement hard disks You can use hard disks of the following types with the PS3™ system. 2.5 inch (internal type) *1 Serial ATA *2 *1 Proper operation is not guaranteed for all models. *2 Parallel ATA is not supported. Size Interface format Replacing the hard disk Replacing the hard disk If the system software does not start when the system is turned on (such as when the hard disk has been replaced), a screen such as the one shown below is displayed. In this case, you must reinstall the system software using downloaded update data. Downloading system software update data Using a PC with Internet access, download the system software update data from the website...

Scarica la tua

Per scaricare, digitare 2 cifre :