valutazioni - 3, GPA: 4.7
(
)
)
|
Facilità d'uso
• Thermal Rollback This is a safety feature designed to prevent the power chair from overheating and causing damage to the motors or controller. NOTE: The Remote Plus can be programmed to have up to five drive profiles or one drive profile and five speed adjustments. Remote Plus Controller Basic Operation Instructions On/Off Button Press to power on or off the power chair and controller. Mode Button Used to select the various functions available with the Remote Plus. Speed/Profile Indicator Series of five colored LEDs which display the speed or profile setting. Battery Condition Meter Indicates the approximate amount of battery life using color-coded LED bars. Horn Button Activates a warning horn. Actuator Indicators Four LEDs indicate recline, tilt, power leg rests, and elevating seat actuator modes. Joystick A multi-functional tool used to control speed, direction, and actuator adjustment. BACK VIEW Off-board Charger/ Programming Port Used to charge or program the power base. Mounting Bracket Access An alternate Remote Plus mounting option may be available with your power chair. Harness Connector Port Used to connect the Remote Plus to the power base. Figure 1. Remote Plus Components and Connections (3-Key Shown) Remote Plus Controller Basic Operation Instructions OPERATING THE REMOTE PLUS CONTROLLER The Remote Plus Controller is used to operate your power chair and all of its components. The Remote Plus controller consists of (see figure 2): 1. joystick 2. keypad 3. controller communications connector 4. 3-pin off-board charger/programming socket 5. power module 6. intermediate harness with charger connection Joystick Control The joystick controls the direction and speed of your power chair. When you move the joystick from the neutral (center) position, the electromagnetic brakes release and allow your power chair to move. The farther you push the joystick from its neutral position, the faster your power chair moves. When you release the joystick and allow it to return to the neutral position, you engage the electromagnetic brakes. This causes your power chair to decelerate and come to a complete stop. Keypad The keypad is located directly in front of the joystick. It contains keys that you will use to control your power chair. See figures 3 and 4. On/Off Key The on/off key turns the system on and off. WARNING! Unless faced with an emergency situation, do not use the on/off key to stop the chair. This will cause the power chair to stop abruptly. WARNING! Always turn the power off when you are stationary to prevent unexpected movement. Remote Plus Controller Basic Operation Instructions 1 2 3 4 5 6 Figure 2. Remote Plus Controller Figure 3. 3-Key Controller Keypad Figure 4. 7-Key Controller Keypad Remote Plus Controller Basic Operation Instructions Mode Key (Speed Settings) The mode key controls the speed settings. The Remote Plus speed settings range from 1 to 5. Typically, the slowest speed setting is 1 and the fastest speed setting is 5. The settings are indicated by the number of lights that are lit on the speed setting indicator. NOTE: The speed settings are preset at the factory. If your authorized Pride Provider changes the order of these settings, please make note of these changes. Contact your authorized Pride Provider for more information. NOTE: Profiled joysticks function differently than those without profiles. If your power chair was programmed with more than one drive profile, contact your authorized Pride Provider for more information regarding operation. Horn Key The horn key activates a warning horn. Battery Condition Meter The battery condition meter is a 10-segment illuminated display located in front of the joystick. When the lights are on, it indicates that there is power to the Remote Plus. The lights also indicate battery status, Remote Plus operational status, and electrical system status. • !!!!!Red, yellow, and green lights lit: Batteries charged; controller and electrical system OK. • !!!!!Red and yellow lights lit: Charge batteries if possible; controller and electrical system OK. • !!!!!Red lights only lit or slow flash: Charge batteries as soon as possible; controller and electrical system OK. • !!!!!Rapid flash of lights: The Remote Plus has detected a problem in the electrical system and power chair drive operation is inhibited. Refer to “Fault Codes.” • !!!!!Ripple up and down of lights: The joystick was not in the neutral position when the controller was turned on. If you get “ripple up and down of lights,” turn off the controller and allow the joystick to return to the neutral position, then turn on the controller. Remote Plus Controller Basic Operation Instructions NOTE: If you still get “ripple up and down of lights,” contact your authorized Pride Provider. NOTE: When the batteries approach a discharged state, the red lights will begin to slowly flash, remindin...