valutazioni - 1, GPA: 4
(
)
)
|
Facilità d'uso
Turn the UPS “Off” and have it serviced immediately. All indicators are “Off” and The UPS is shutdown and the None. The UPS will return the UPS is not operating. battery is discharged from an extended power outage. to normal operation when the power is restored and the battery has a sufficient charge. The replace battery light is illuminated. Weak batteries. Allow the batteries to recharge for at least 4 hours. If the problem persists after recharging, replace the batteries. Replacement batteries not Confirm the battery connected properly. connections. The overload light is The UPS is overloaded. Reduce the load on the illuminated or flashing UPS by unplugging equipment. If the UPS requires service, please do not return it to the dealer! Follow these steps: 1. Use the Troubleshooting section of the Quick Reference Guide to eliminate common problems. 2. Verify that no circuit breakers are tripped. A tripped circuit breaker is the most common UPS problem! 3. If the problem persists, call customer service or visit the APC Internet Website (• Note the model number of the UPS, the serial number, and the date purchased. A technician will ask you to describe the problem and try to solve it over the phone, if possible. If this is not possible the technician will issue a Return Merchandise Authorization Number (RMA#). • If the UPS is under warranty, repairs are free. If not, there is a repair charge. 4. Pack the UPS in its original packaging. If the original packing is not available, ask customer service about obtaining a new set. • Pack the UPS properly to avoid damage in transit. Never use Styrofoam™ beads for packaging. Damage sustained in transit is not covered under warranty. • Include a letter with your name, RMA#, address, copy of the sales receipt, description of the trouble, your daytime phone number, and a check (if necessary). • Mark the RMA# on the outside of the package. 5. Return the UPS by insured, prepaid carrier to the address given to you by Customer Service. APC Contact Information USA/Canada ………….. Mexico ………………….. Brazil ……………………. Worldwide ……………… Internet …………………. Technical Support ……. 1-800-800-4272 292-0253 / 292-0255 0800-12-72-21 1-401-789-5735 Specifications 1000 VA 1050 VA 1100 VA 1400 VA Acceptable input voltage 0 - 160 VAC Input voltage (on-line operation) 94-148 VAC Output voltage 106-127 VAC Input Over Current Protection Resettable circuit breaker Frequency limits (on-line operation) 47 - 63 Hz (auto-sensing) Transfer time 4 ms typical, blackout response time Maximum load 1000 VA 670 W 1050 VA 670 W 1100 VA 670 W 1400 VA 950 W On-battery output voltage 115 VAC On-battery frequency 50 or 60 Hz, ±0.1 Hz; unless synchronized to utility during brownout On-battery waveshape Stepped sine-wave Output Over Current Protection Over-current and short-circuit protected, latching shutdown on overload Battery type Spill proof, maintenance free, sealed lead-acid Typical battery life 3 to 6 years, depending on number of discharge cycles and ambient temperature Typical recharge time 2 to 5 hours from total discharge Operating temperature 0 to +40° C (+32 to +104° F) Storage temperature -15 to +45 °C (+5 to +113° F) Operating / storage relative humidity 0 to 95%, non-condensing Operating elevation 0 to +3,000 m (0 to +10,000 ft) Storage elevation 0 to +15,000 m (0 to +50,000 ft) Audible noise at 1 m (3 ft) <45 dBA Size (H x W x D) 21.6 x 17.0 x 43.9 cm (8.5 x 6.7 x 17.3 in.) Weight - net (shipping) 19.3 (21.1) kg 42.5 (46.5) lb. 19.3 (21.2) kg 42.5 (46.8) lb. 24.1 (25.9) kg 53.0 (57....
Questo manuale è adatto anche per i modelli :Alimentazione e alimentazione - 1050 (267.54 kb)
Alimentazione e alimentazione - 1100 (267.54 kb)
Alimentazione e alimentazione - 1000 (267.54 kb)