Log:
valutazioni - 3, GPA: 3 ( )

Istruzioni per l'uso Allied Telesis, Modello AT-PWR14

Produttore : Allied Telesis
File Size : 449.67 kb
File Nome : 8c6ee027-171b-4505-989a-b556ec9aa5ec.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


If the standard power supply fails or loses power, the ATPWR14 module changes from standby to active and provides all power to the system to prevent a network failure. Figure 1. AT-PWR14 Power Supply Module Note The power supply is hot-swappable. You can install it without powering OFF the AT-CV5000 chassis. POWER FAULT AT-PWR14 208 Related Documents This installation guide is an abbreviated version of the installation procedure. For details on the components, features, and functions of this product, refer to the following documents on our web site, . AT-CV5000 Media Converter Chassis Installation Guide (PN 613-50580-00) . AT-S70 Management Software User’s Guide (PN 613-50617-00) Package Contents Make sure the following items are included in the shipping package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance. . One AT-PWR14 Redundant Power Supply (AC) . This Installation Guide . Warranty Card Locations of the Power Supply Slots Figure 2 illustrates the locations of the two power supply modules at the rear of an AT-CV5000 AC model chassis. Figure 2. Locations of the Power Supply Slots on the Rear Panel of an AT-CV5000 AC Model Chassis Before installing a power supply, please note the following guidelines: Note The AT-CV5000 chassis comes with two slots designated for the power supplies; however, it is shipped with one standard power supply preinstalled and one empty slot for an optional power supply. The redundant power supply can be ordered separately from your ATI sales representative. Note Make sure that both power supplies (primary and redundant) are rated for the same power ratings. For information on the power supply module, refer to the documentation that is shipped with the module. Note The AT-PWR14 power supply can be installed in either one of the power supply expansion slots while the converter chassis is powered ON. You do not need to power OFF the chassis to install the power supply. POWER FAULT AT-PWR14 A B 100-240VAC~ AT-CVFAN A 100-240VAC~ AT-CVFAN B 214 PS SLOT A - Primary PS SLOT B - Redundant Installing the AT-PWR14 Power Supply To install the AT-PWR14, perform the following procedure: 1. Unpack the new AT-PWR14 module from its shipping container and store the package material in a safe location. Note You must use the original shipping material if you need to return the power supply module to Allied Telesis. 2. Select the power supply slot in the AT-CV5000 chassis where you want to install the AT-PWR14 power supply. 3. Make sure that the power switch is in the OFF position. 4. Loosen the two captive screws that secure the blank slot cover (AT-CV5PNL2) of the selected power supply slot, and remove the blank slot cover, as shown in Figure 3. Figure 3. Removing the Power Supply Slot Cover 5. Remove the AT-PWR14 module from its shipping package. 6. Slide the AT-PWR14 module into the RPS slot, as shown in Figure 4. Figure 4. Inserting the AT-PWR14 Module into the Power Supply Slot 7. Secure the AT-PWR14 module to the AT-CV5000 chassis by using a Phillips screwdriver to tighten the captive screws, as shown in Figure 5. Figure 5. Securing the AT-PWR14 Module 211 A 100-240VAC~ AT-CVFAN A 100-240VAC~ WARNING This unit might have more than one power input. To reduce the risk of electric shock, disconnect all power inputs before servicing unit. 209 A 100-240VAC~ POWER FAULT AT-PWR14 A WARNING This unit might have more than one power input. To reduce the risk of electric shock, disconnect all power inputs before servicing unit. 212 A 100-240VAC~ POWER FAULT AT-PWR14 A AT-CVFAN WARNING This unit might have more than one power input. To reduce the risk of electric shock, disconnect all power inputs before servicing unit. CONVERTEON™ Family AT-PWR14 Redundant Power Supply (AC) Installation Guide Allied Telesis, Inc. 613-50585-00 Rev C 1 2 3 *613-50585-00 Rev C* Powering On an AC Powered Chassis To power on an AC powered chassis, perform the following procedure: 1. Make sure that the ON/OFF power switch is in the OFF position, as shown in Figure 6. Figure 6. ON/OFF Power Switch in OFF Position 2. Position the power cord retaining clip in the up position, as shown in Figure 7. Figure 7. Power Cord Retaining Clip in the Up Position 3. Plug the power cord into the AC power connector on the back of the chassis, as shown in Figure 8. Figure 8. Connecting the AC Power Cord 4. Secure the cord by lowering the power cord retaining clip, as shown in Figure 9. Figure 9. Securing the Power Cord with the Retaining Clip POWER FAULT AT- P W R14 A AT-CVFAN A 100-240VAC~ WARNING This unit might have more than one power input. To reduce the risk of electric shock, disconnect all power inputs before servicing unit. 277 POWER FAULT AT-PWR14 A AT-CVFAN A 100-240VAC~ WARNING This unit might have more than one power input. To reduce the risk of electric shock, disconnect all power inputs before servicing unit. 278 POWER FAULT AT-PW...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie