1. Shut off the pump or sprayer. 2. Trigger the gun. 3. Open the gun air valve. 4. Disconnect the power source. Grounding To reduce the risk of electric shock, proper electrical grounding is essential. See your separate pump or sprayer instruction manual, and consult your local electrical codes for detailed grounding instructions. Working Pressure To reduce the risk of component rupture and serious bodily injury, never exceed 100 psi (7 bar) AIR OR FLUID WORKING PRESSURE to this gun. Do not exce

For professional use only. Not for use in explosive atmospheres. 100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Model 224892, Series A aluminum, with PTFE diaphragm Model 224893, Series A aluminum, with buna–N diaphragm Model 224894, Series B stainless steel, with PTFE diaphragm Model 224895, Series B stainless steel, with buna–N diaphragm Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sparks can ignite fumes from solvents and the fluid being pumped, dust particles, and other flammable substances, whether you are pumping indoors or outdoors, and can cause a fire or explosion and serious bodily injury and property damage. If you experience any static sparking or even a slight shock while using this equipment, stop pumping immediately. Do not use the system again until the problem has been identified and corrected. To reduce the risk of static sparking, ground the pump, surge su

Includes enough parts to service Buna-N Diaphragm Kit D05007 the surge suppressor twice. For Models 224893 and 224895. Includes enough parts Ref to service the surge suppressor twice. No. Part No. Description Qty. Ref 15 110004 PACKING, o-ring 2 No. Part No. Description Qty. 16 110636 O-RING; PTFE 8 13 190148 DIAPHRAGM; buna–N 2 17 15V281 GUIDE, ball; stainless steel 4 15 110004 PACKING, o-ring 2 18 15V282 STOP, ball; stainless steel 4 16 110636 PACKING, o-ring 8 . 108639 BALL; 0.75”; PTFE 4 . 1

2 Lubricate inner diameter of housing (8) with lithium-based grease Air inlet 1/4 npt(f) . . Parts Drawing Model 224892, Series A, aluminum surge suppressor with PTFE diaphragm Model 224893, Series A, aluminum surge suppressor with buna–N diaphragm Model 224894, Series A, stainless steel surge suppressor with PTFE diaphragm Model 224895, Series A, stainless steel surge suppressor with buna–N diaphragm 10 (PTFE, 183542) **13 (buna–N, 190148) 2 Torque to 3 to 6 ft-lb (4 to 8 N.m) 3 9 Chamfer faces

CAUTION In systems using pumps with a ratio greater than 1:1, fluid may escape into the surge suppressor air line and contaminate the air supply if the diaphragm fails. Installation of a check valve in the air line will prevent fluid contamination of the air line. Flushing the System Flush the system regularly, using a compatible solvent. Do not allow fluid to dry in the pump or surge suppressor. Always flush the pump and surge suppressor before storing them for any length of time. Place the pum

. Parts Matrix Replacement Parts for Husky 750 and Husky 2000 Surge Suppressors, Series A Parts NOTE: The quantity of every part in this list for X’is isis 1 11 for every everyevery model modelmodel . The TheThe X’s ss indicate indicateindicate the thethe parts that are included in each model. Ref No. Part No. Description Surge Suppressor Models Automatic Husky 750 Automatic Husky 2000 Manual Husky 750 Manual Husky 2000 2 3 9 0 9 5 2 3 9 0 9 6 2 3 9 1 2 1 2 3 9 1 2 2 2 3 9 1 2 3 2 3 9 1 2 4 2 3

. Model Numbers Automatic Husky 750, 3/4-in Surge Suppressors Polypropylene Wetted Bottom Housing and Non-Wetted Top Housing 239096 with Buna–N bladder 239121 with PTFE bellows 239122 with fluoroelastomer bladder Stainless Steel Wetted Bottom Housing and Non-Wetted Top Housing 239095 with Buna–N bladder 239123 with PTFE bellows 239124 with fluoroelastomer bladder Automatic Husky 2000, 2-in Surge Suppressors Stainless Steel Wetted Bottom Housing, Polypropylene Non-Wetted Top Housing 239093 with B

. Parts Matrix Replacement Parts for Husky 750 and Husky 2000 Surge Suppressors, Series A Parts NOTE: The quantity of every part in this list for X’is isis 1 11 for every everyevery model modelmodel . The TheThe X’s ss indicate indicateindicate the thethe parts that are included in each model. Ref No. Part No. Description Surge Suppressor Models Automatic Husky 750 Automatic Husky 2000 Manual Husky 750 Manual Husky 2000 2 3 9 0 9 5 2 3 9 0 9 6 2 3 9 1 2 1 2 3 9 1 2 2 2 3 9 1 2 3 2 3 9 1 2 4 2 3

Les parties reconnaissent avoir convenu que la redaction du presente document sera en Anglais, ainsi que tous documents, avis et procedures judiciaires executes, donnes ou intentes a la suite de ou en rapport, directement ou indirectement, avec les procedures concernees. Graco Information For the latest information about Graco products, visit TO PLACE AN ORDER, contact your Graco distributor or call to identify the distributor closest to you: Phone: 612–623–6921 or Toll Free: 1–800–328–0211 Fax: