Log:
valutazioni - 3, GPA: 4.3 ( )

Istruzioni per l'uso McCulloch, Modello 6096-200317

Produttore : McCulloch
File Size : 873.7 kb
File Nome : MOUS2008-MCS2003-6096200317-966994701.pdf
Lingua di insegnamento: enesfr
Vai a scaricare



Facilità d'uso


If your unit is for use on less than 150 volts, it has a plug as illustrated in sketch A in Figure 2-1A. If it is for use on 150 to 250 volts, it has a plug as illustrated in sketch D, Fig.2-1A An adapter, sketches B and C, is available for connecting plugs as illustrated in sketch A to 2-prong receptacles. The green-colored rigid ear, lug, or the like, must be connected to permanent ground, such as a properly grounded outlet box. No adapter is available for the plug illustrated in sketch D. 5. EXTENSION CORD - Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance’s plug. a. When using the chipper shredder, an extension cord of adequate size must be used for safety and to prevent loss of power and overheating. b. The extension cord must be specifically intended for outdoor use and marked “SJ” or “SJT” and with the suffix “WA”. In Canada, the extension cord must be marked “SFTW”. c. Inspect extension power cord for loose or exposed wires and damaged insulation. If damaged, replace before using appliance. DO NOT ABUSE POWER CORD - Never carry power equipment by cord or pull cord to disconnect from outlet. Keep cord clear of operator and obstacles at all times. Do not expose cord to heated surfaces, oil or water. Do not pull cord around sharp edges, corners or close door on cord. 6. Avoid dangerous environment. Do not use power equipment in damp or wet locations. 7. Don’t use in rain. Water entering a power tool will increase the risk of electric shock. 8. Do not abuse cord. Never pull on power cord to disconnect from receptacle. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. PERSONAL SAFETY 9. Keep children away. All bystanders should be kept at a safe distance from work area. 10. Dress properly. Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair. 11. Use safety glasses. Always use face or dust mask if operation is dusty. 12. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tools while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. 13. Avoid unintentional starting. Do not move pluggedin power equipment with finger on switch. Be sure switch is off when plugging in. 14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected conditions. 15. No accessories or attachments are necessary for the operation of this gardening tool. The use of any accessories or attachments for this gardening tool is not recommended. Such use of any attachment or accessory may increase the risk of injury to the user. 16. Do not use force. The correct tools will do the job better and safer at the rate for which it is designed. 17. Disconnect the plug from the power source before making any adjustment, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. 18. Store tools indoors. When not in use, tools should be stored indoors in dry, and high or locked-up place, out of reach of children. 19. Maintain tools. Keep cutting tools sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Inspect tool cord periodically, and if damaged, have it repaired by an authorized service facility. Keep handling surface dry, clean, and free from oil and grease. 20. Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual. 2-2. PRECAUTIONS FOR USING CHIPPER/ SHREDDER 1. Extreme caution should be taken to ensure shreddable material does not contain metal, rocks, bottles, cans or other foreign objects. 2. Do not allow hands or any other part of the body, or clothing to enter inside the feeding chambers or discharge chute, while machine is operating. 3. Wear gloves while operating the machine. 4. Before starting the machine, ensure that all screws and other fasteners are properly secured. 5. Machine should be operated on firm level surfaces only. 6. Before starting the machine, check that the cutting chamber is empty. 7. Motor should be kept clean of debris and other accumulations. 8. Keep all guards and deflectors in good w...

Questo manuale è adatto anche per i modelli :
Giardino Trituratori - 966994701 (873.7 kb)
Giardino Trituratori - MCS2003 (873.7 kb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie