valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Note:Trimming without a comb results in a hair length of approximately 0.5mm. 2 Move the appliance towards the desired contour of your bikini line.Touch the skin lightly with the precision trimming head (Fig. 17). Note: Make sure you stretch your skin with your free hand to avoid possible injuries. Note: Do not press the appliance too firmly onto the skin. You can use the appliance: -with the trimmer teeth vertically on the skin. Use this method to create straight lines or other shapes. Do not make long strokes, but tap the skin lightly with the trimmer teeth (Fig. 18). -with the teeth of the trimming head parallel to the skin. Use this method to shorten the hairs to a minimum length around the contours of your bikini line (Fig. 19). Cleaningandmaintenance Always switch off and unplug the appliance before you clean it. Never switch on the appliance while you clean it or while the cutting unit is not attached. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. 10 1010 EnglisH Cleaning the handle and adapter 1 Clean the handle with the cleaning brush or under a running tap. Note: Make sure that the handle is completely dry before you reassemble the appliance. 2 If necessary, clean the adapter with the cleaning brush or a dry cloth. Always keep the adapter dry. Never rinse it under the tap or immerse it in water. Cleaning the shaving head 1 2 Press the on/off button to switch off the appliance (Fig. 20). Pull the shaving head off the appliance (Fig. 6). Do not exert pressure on the double shaving foil to avoid damage. 3 4 Push the cutting unit release slide to the right (1) and remove the cutting unit (2) (Fig. 21). Clean the cutting unit and the inside of the shaving head with the cleaning brush. Also brush away any hairs that have collected under the trimmer (Fig. 22). Caution: Do not brush the foil to avoid damage to the brush or the foil. You can also rinse the cutting unit and the shaving head under the tap.To dry the cutting 5 6 unit and the shaving head, shake them firmly (Fig. 23). Place the cutting unit back onto the shaving head (‘click’) (Fig. 24). Note: Make sure that the shaving head and the cutting unit are completely dry before you reattach them onto the appliance. Cleaning the precision trimming head and combs Press the on/off button to switch off the appliance. (Fig. 25) If a comb is attached to the precision trimming head, remove the comb (Fig. 10). Remove the precision trimming head (Fig. 8). Brush the hairs off the precision trimming head or rinse it under the tap (Fig. 26). Brush the hairs off the combs or rinse them under the tap. You can also rinse the precision trimming head and the combs under the tap.To dry them, shake them firmly or use a tea towel (Fig. 27). To reattach the precision trimming head, slide it into the guiding grooves on both sides of the opening in the handle (‘click’) (Fig. 7). 1 2 3 4 5 6 7 Note: Make sure that the precision trimming head is completely dry before you reattach it onto the appliance. maintenance 1 Lubricate the cutting unit (double shaving foil and trimmer) or the precision trimming head, when attached on the handle, with a drop of sewing machine oil twice a year. (Fig. 28) EnglisH 11 1111 2 Let the appliance operate briefly to spread the oil. replacement The shaving head, the precision trimming head, both combs (3mm and 5mm) and the adapter of the appliance can be replaced. If you need to replace one or more parts, go to your Philips dealer or an authorised Philips service centre. If you use the Ladyshave two or more times a week, we advise you to replace the shaving head after one or two years or if it is damaged. storage 1 Store the appliance in a safe, dry place. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 29). -The built-in rechargeable batteries contains substances that may pollute the environment. Always remove the batteries before you discard and hand in the appliance at an official collection point. Dispose of the batteries at an official collection point for batteries. If you have trouble removing the batteries, you can also take the appliance to a Philips service centre.The staff of this centre will remove the batteries for you and will dispose of it in an environmentally safe way (Fig. 30). removing the rechargeable batteries Disconnect the appliance from the adapter. Let the appliance run until the batteries are completely empty. Remove the shaving head or precision trimming head. Release the side panels on both sides of the appliance with a screwdriver and remove them (Fig. 31). Remove the front panel by pushing it upwards with a screwdriver. Cut the wires at the end of the handle and pull out the inner parts.Take out the rechargeable batteries (Fig. 32). 1 2 3 4 Do not try to replace the recha...