valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
3 4 Switch on the ladyshave (Fig. 9). , Place the shaving unit gently on the skin and move the ladyshave slowly against the direction of hair growth while pressing it lightly. The angle between the skin and the ladyshave should be 70° to get the best results (Fig. 8). Trimming Put the comb attachment onto the shaving head to trim the hairs , to an even length (about 5mm), e.g. in the bikini zone (Fig. 10). EnglisH head with the recess of the attachment on the front of the appliance (Fig. 1 ). To trim the underarms, place the comb attachment on the shaving head with the recess of the attachment on the back of the appliance (Fig. 13). Switch on the ladyshave. , Move the appliance against the direction of hair growth. Make sure the surface of the comb always stays in contact with the skin (Fig. 14). shaping The comb attachment can be put onto the shaving head in different positions, depending on the area to be trimmed. 3 4 5 1 Set the Trim/Shave slide to the ‘Trim’ position (Fig. 11). To trim the bikini zone, place the comb attachment on the shaving 1 Remove the comb attachment to shape precise lines and contours, e.g. in the bikini zone (Fig. 15). Lock the long hair trimmer by setting the Trim/Shave slide to the ‘Trim’ position (Fig. 11). Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. after every use Clean the ladyshave ever y time you have used it. 1 Switch off the ladyshave. Remove the shaving foil (Fig. 16). Do not exert any pressure on the shaving foil to avoid damage. 3 Gently shake the shaving foil to remove hairs or clean it with the brush supplied. 8 EnglisH 4 Remove the cutter block (Fig. 17). 5 Clean the hair chamber with the brush supplied (Fig. 18). 6 For extra thorough cleaning, you can also rinse the ladyshave under the tap. Make sure the battery compartment is properly closed when you clean the appliance under the tap 7 After cleaning, always put the comb attachment on the appliance to protect the shaving foil (Fig. 10). Twice a year Lubricate the shaving foil with a drop of sewing machine oil twice a , year (Fig. 19). storage When you are not using the ladyshave you can store it in the shower by hanging it upside down from the shower loop. Attach the shower loop to the appliance as shown in the , picture (Fig. 0). replacement If you use the ladyshave two or more times a week, we advise you to replace the shaving foils and cutter block ever y one to two years. -The silver shaving foil may only be replaced with an original Philips shaving foil (type HP6117/01). -The golden shaving foil may only be replaced with an original Philips shaving foil (type HP6121). -The cutter block may only be replaced with an original Philips cutter block (type HP6111). Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for EnglisH recycling. By doing this, you help to preser ve the environment (Fig. 21). -Batteries contain substances that may pollute the environment. Do not throw away empty batteries with the normal household waste, but dispose of them at an official collection point for batteries. Always remove the batteries before you discard and hand in the appliance at an official collection point. Troubleshooting Problem Cause Solution Reduced The shaving head is Remove the shaving foil and shaving/ dir ty. clean it with the brush trimming supplied. performance. Clean the cutter block with the brush supplied. Make sure that no hairs are stuck under the timmer. The batteries are running low. Replace the batteries (see chapter ‘Preparing for use’). The shaving head Lubricate the shaving foils with needs to be a few drops of sewing machine lubricated. oil twice a year. The appliance is Make sure you move the being used in the appliance against the direction wrong way. of hair growth. 10 EnglisH Problem Cause Solution The trim/shave slide has been set to the wrong position. Set the trim/shave slide to the ‘shave’ position when you are shaving with the shaving foils. Set the trim/shave slide to the ‘trim’ position when you are trimming with the comb attachment or shaping precise lines and countours without the comb attachment. Stronger skin irritation than usual. One or both shaving foils are damaged or worn. Replace one or both shaving foils. Sensitive areas are being shaved with the trim/shave slide set to the ‘trim’ Make sure the trim/shave slide has been set to the ‘shave’ position when shaving sensitive areas. position. The appliance does not work. The batteries have Make sure the + and - marks not been properly placed in the batter y on the batteries match those in the batter y compar tment. compar tment. The batteries are empty. Replace the batteries. The batter y Close the batter y compar tment has compar tment properly (‘click’). not been properly closed. EnglisH 11 Problem Cause Solution The appliance was Let the...
Questo manuale è adatto anche per i modelli :Elettrico - HP6317/00 (4.69 mb)