valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water ever y time you have used the appliance. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Every day: shaving unit and hair chamber 1 2 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and open the shaving unit (2). EnglisH 3 Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. Rinse the outside of the appliance. Close the shaving unit and shake off excess water. 4 5 Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 6 Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads 1 Open the shaving unit and pull it off the shaver. You can also leave the shaving unit attached to the shaver. 2 Remove the retaining frame. 3 Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you EnglisH accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 4 Put the shaving heads back into the shaving unit and then put the retaining frame back into the shaving unit. Make sure that the projections of the shaving heads fit into the recesses. 5 6 Put the shaving unit back onto the shaver by inserting the hinge into the slot in the rim of the hair chamber and pushing it home until itlocks into place (‘click’). Close the shaving unit. Trimmer Clean the trimmer ever y time you have used it. 1 2 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Clean the trimmer with the brush supplied. 3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. 10 EnglisH storage Put the protection cap on the shaver to prevent , damage. Store the appliance in the pouch. , Replacement Replace the shaving heads ever y two years for optimal shaving results. Replace damaged or worn shaving heads with HQ8 Precise Cutting System Shaving Heads only. 1 2 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Open the shaving unit and pull it off the shaver. You can also leave the shaving unit attached to the shaver. 3 Remove the retaining frame. 4 Remove the shaving heads and place new ones in the shaving unit. Put the shaving heads back into the shaving unit and then put the retaining frame back into the shaving unit. Make sure that the projections of the shaving heads fit into the recesses. 5 5 6 EnglisH 11 Put the shaving unit back onto the shaver by inserting the hinge into the slot in the rim of the hair chamber and pushing it home until itlocks into place (‘click’). Close the shaving unit. Accessories The following accessories are available: -HQ8 Precise Cutting System Shaving Heads -HQ110 Philips Shaving Head Cleaning Spray (not available in China) Enviro...
Questo manuale è adatto anche per i modelli :Elettrico - HQ6095/16 (1.89 mb)
Elettrico - HQ6090/16 (1.89 mb)