Log:
valutazioni - 0, GPA: 0 ( )

Istruzioni per l'uso Philips, Modello SCD501/10

Produttore : Philips
File Size : 2.88 mb
File Nome :
Lingua di insegnamento: ruplhrukenbgetslhuskcslvltrokk
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :

Facilità d'uso


Why does the parent unit beep?
Why is the connection lost or are there sound
• If the parent unit beeps while the ‘link’ light
interruptions every now and then?
flashes red continuously, the connection with
• The baby unit and the parent unit are probably
the baby unit is lost. Move the parent unit closer
close to the outer limits of the operating
ENGLISH
to the baby unit or switch on the baby unit if it
range. Try a different location or decrease the
was off.
distance between the units. Please note that
• The baby unit may be switched off. Switch on
it takes about 30 seconds each time before a
the baby unit.
connection between the units is established.
• You may have placed the unit next to a
Why does the appliance produce a high-pitched
transmitter or other DECT appliance, such as
noise?
a DECT telephone or other 1.8GHz/1.9GHz
The units may be too close to each other. Make
baby monitor. Move the unit away from the
sure the parent unit and the baby unit are at least
other appliances until the connection is re-
1 metre/3.5 feet away from each other.
established.
Why don’t I hear a sound/Why can’t I hear
Is my baby monitor secure from eavesdropping
my baby cry?
and interference?
• The baby unit and the parent unit may be out
• The DECT technology of this baby monitor
of range of each other. Reduce the distance
guarantees no interference from other
between the units.
equipment and no eavesdropping.
• You may have set the volume to the lowest
level (mute). Increase the volume.
Why do the batteries of the parent unit run low
so fast when I use the unit on batteries?
Why does the parent unit react too quickly to
• The operating time on batteries may be up
other sounds?
to 24 hours, but this depends on the type of
• The baby unit also picks up other sounds than
batteries and how often and how long you use
those of your baby. Move the baby unit closer
the parent unit on batteries. Please note that
to the baby (but observe the minimum distance
the batteries are not charged when the parent
of 1 metre/3.5 feet).
unit is connected to the mains. Plug in the
parent unit when a wall socket is available close
The specified operating range of the baby
by to save battery power.
monitor is 300 metres/985 feet. Why does my
• Make sure you use 1.5V R6 AA alkaline
baby monitor manage a much smaller distance
non-rechargeable batteries or charged 1.2V
than that?
R6 AA rechargeable batteries. Recharge the
• The specified range is only valid outdoors in
rechargeable batteries in a separate battery
open air. Inside your house, the operating range
charger.
is limited by the number and type of walls and/
or ceilings in between. Inside the house, the
Can I use the baby unit on batteries?
operating range is up to 50 metres/150 feet.
• No, you cannot use the baby unit on batteries.
The baby unit can only be used on mains
power.
11


...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie