valutazioni - 1, GPA: 4 ( )

Produttore : DeLonghi File Size : 170.72 kb File Nome : Lingua di insegnamento:

N.B.This function is not guaranteed in the event of power failures, lasting more than 2 minutes. Programming the Electronic Timer The timer allows you to set two programs in a 24h period. To program the timer: Press the “Timer button A, this accesses the program, the following is displayed: -The flashing message “--:--“; -The message “ON” at the bottom left (ON time setting); -The symbol “A” at the right indicating that the first program controlling is being set; To setting the starting time press “hour button” to set the hour and “min button” to set the minutes, then confirm the ON time by pressing the “Timer button A” again. The words “OFF” and “00:00” appear on the display. Set the time you want the appliance to go OFF using the “hour button” and “min button”, then confirm the OFF time by pressing the “Timer Function A” button again. At this point, the word “AUTO” appears at the top of the display and the “TIMER ON” indicator light comes on to indicate that the appliance is ready to operate at the programmed time maintaining the preset comfort temperature (fig.5). AUTO :°F fig. 5 -To set the program B press “Timer button B” and follow the same procedure as described for the program A. -Use the “ +” or “ -” buttons to set the desired comfort temperature, as described above. -When set in this way the heater will automatically switch on at the set time for the designated time period and automatically maintain the preset comfort temperature. 5 GB 23-03-2004 16:21 Pagina 6 To cancel a preset aprogramme, press the timer button A or B once and then press the hour button until the display shows “--:--“ (fig.6). AUTO :fig. 6 TIMER OVERRIDE To operate the appliance without using the programmes (timer), press the “ON MODE” button (Fig.5). The yellow lamp will go off. IMPORTANT: If the heater looses its electricity supply for more than 2 minutes the appliance does not switch on. The display shows the blinking numbers. To switch it on, repeat the above described operations. WARNINGS You must leave the heater plugged in at the mains socket to keep the heaters memory programmed. If the heater looses its electricity supply for more than 2 minutes, e.g. switched off at the mains socket or in the event of a power failure, the heater’s programmes will be lost, and the heater will not work until reset. A safety device switches the heater off in the event of overheating. To restart the heater, call the nearest Service Center to change the safety device. Note: when the safety device intervenes, the heater doesn’t heat but the display regularly works. 4. MAINTENANCE AND SERVICE Always remove the plug from the power socket and allow the radiator to cool. Wipe radiator with a soft damp cloth, do not use detergents and abrasives. Should the radiator not be in use over a certain length of time, wind the cable round the holder and store it in a dry place. This appliance has been built to give many years of trouble free service. In case of malfunction or doubt, do not try...

Scarica la tua

Per scaricare, digitare 2 cifre :