valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater. HEATSTAR High-Intensity Infrared Heaters HS4040 HS9100S HS8060 HS9120 Mo d el s Installer: Leave this manual with the appliance. Consumer: Retain this manual for future reference. If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. WARNING : — Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. — WHAT TO DO IF YOU SMEL GAS • Shut off gas supply • Do not try to light appliance • Do not touch an electrical switch; do not use any phone in your building • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions • If you cannot reach your gas supplier, call the fire department — Installation and service must be performed by a qualified installer, service agency or the gas supplier. This is an unvented gas-fired heater. It uses air (oxygen) from the area in which it is used. Adequate combustion and ventilation air must be provided. Refer to page 4. ENERCO GROUP INC., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-916-3000 4000 & 8000 Models 9000 Models 18650 Rev. A 06/08 Enerco Group, Inc. |Gas-Fired Infra-Red Space Heaters 2 Operating Instructions and Owner’s Manual CONTENTS General Information........................................................... 3 Clearances......................................................................... 3 Gas Supply......................................................................... 3 Gas Pressure...................................................................... 3 Electrical............................................................................ 4 Thermostat & Location....................................................... 4 Ventilation......................................................................... 4 Operations......................................................................... 4 Cleaning Information......................................................... 4 Connection diagram for flame rod current for flame rectification systems....................................... 5 Thermostat........................................................................ 5 Replacement parts............................................................. 7 Control system replacement parts.................................... 10 WARNING : Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.WARNING : When used without fresh air, heater may give off CARBON MONOXIDE, an odorless poisonous gas. OPEN WINDOW AN INCH OR TWO FOR FRESH AIR WHEN USING HEATER. WARNING : This heater is equipped with a PILO T LIGHT SAFETY SYSTEM. DO NOT TAMPER WITH PILO T LIGHT SAFETY SYSTEM. WARNING : If heater shuts off, do not relight until you provide fresh air. If heater keeps shutting off, have it serviced. Keep burner and control clean. Open door for 5 minutes. Maintain clearances as shown in Figure 1 or on heater nameplate. • DO NOT USE MATCH OR OTHER FLAME FOR LE AK TESTING. • DO NOT EXCEED 1/2 PSI INLET PRESSURE TO HEATER. DANGER : Carbon monoxide poisoning may lead to death.Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have heater serviced. Some people are more affected by carbon monoxide than others. These include pregnant women, persons with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes. CAUTI ON: • Never connect gas valve or thermostat to line voltage or a transformer. • If the infra-red color of the grid becomes dull when the building furnace is operating, consult gas supplier on correct gas supply piping sizes. • This heater is for indoor installation only! NOTE Gasket binder material used in this heater assembly will temporarily emit an odor and/or vapor. This condition will clear up in approximately 20 minutes and thereafter will not reoccur. Refer to page 4 for ventilation. THE STATE OF CALI FORNIA RE QUIRES THE FOLL OWING WARNING : WARNING : Combustion by-products produced when using this product contain carbon monoxide, a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). Enerco Group, Inc. | Gas-Fired Infra-Red Space Heaters 3 Operating Instructions and Owner’s Manual 1. GENERAL IN FORMATI ON a.Your heater comes fully assembled and is tested at the factory for proper gas and in...
Questo manuale è adatto anche per i modelli :Elettrico - HS8060 (1.52 mb)
Elettrico - HS9100S (1.52 mb)
Elettrico - HS9120 (1.52 mb)