Log:
valutazioni - 3, GPA: 5 ( )

Istruzioni per l'uso Standard Horizon, Modello CP500

Produttore : Standard Horizon
File Size : 2.58 mb
File Nome : b67c138a-fbfe-4c1a-9e34-ba27225ff591.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


2. Next move the ShuttlePoint knob until the cursor is over the Mark that you want to be the next leg in the Route. 3. Press [ROUTE]. You will notice a bearing line joins the first and second Mark which means these Marks are selected into the Route. 4. Repeat steps 3 and 4 until all Marks are entered into the Route. NOTE At this point the Route is saved as ROUTE01. If you would like to save the Route under a specificname follow the steps on the previous 9.1 paragraph. Page 52 CP500 9.4 INSERTING A WAYPOINT INTO A ROUTE 1a. Place the cursor on the navigation line between two points and press [ROUTE]. 1b. Place the cursor on the navigation line between two points and press [INSERT]. 2. Move the ShuttlePoint knob to the desired location of the Waypoint and press [ENT]. 9.5 GOTO A ROUTE By having created some Routes, you can choose one of them to place a GOTO on. 9.5.0 By select Route 1. Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor) on the Chart page. 2. Press [GOTO] to show the GOTO popup window. 3. Move the ShuttlePoint knob to highlight ROUTE and press [ENT]. 4. The SELECT ROUTE popup window will be shown. Figure 9.5.0 -Select a Route 5. Move the ShuttlePoint knob to the highlight the desired Route and press [ENT]. 6. On the Chart page, a circle with a Flag is shown on the first leg of the Route you chose and a navigation line is shown, indicating the GPS Chart Plotter is navigating to the first Waypoint in the Route. 9.5.1 By Cursor key 1. On the Chart page move the ShuttlePoint knob until the cursor reaches the starting point of the Route. 2. Press [GOTO] to start following the Route. 3. Press [CLR] twice to revert to Home mode. 9.6 OTHER SETTINGS IN ROUTE MENU You will notice the ROUTE menu has other selections. SELECT Choose an available Route to create or choose a stored Route to show and follow on the Chart page. DELETE Deletes the Route when shown in the above SELECT menu. REVERSE Reverses the Route, when chosen Starting point is at the end of the Route. COLOR Allows changing the color of the navigation lines between in leg in the Route. REPORT The Route Report menu is useful to show details of the Waypoints contained within the Route. This menu also allows you to enter in your average speed and fuel consumption and calculate the approximate fuel used when following the Route. SEND Sends the stored points to a external device (PC) capable of listening to NMEA RTE sentence. RECEIVE Receive the points from an external device (PC) capable of sending NMEA RTE sentence. CP500 Page 53 Page 54CP500 10. TRACKS The GPS Chart Plotter has the capability to store 5 individual tracks and record up to 3000 Track Points. Before using the Track function you will need to setup the Track function that suits your boat. The Track function tracks your vessels location as it moves through the water. The Track function can be setup to lay down a Track for a predetermined time or distance interval. If you have a fast moving boat you may want to setup the GPS Chart Plotter to record a Track point every 0.5NM or if you have a sail boat you may want to setup to lay down a Track point once ever 1 minute. NOTE Please note the Track point memory is 3000 points. This means for a long journey you may have toadjust the time or distance to be able to track your journey. It should be noted when the 3000 Track points are used up, the first Track point layed down will be deleted when a new point is placed on thechart. 1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT]. 2. Move the ShuttlePoint knob to highlight TRACK and press [ENT]. 3. Move the ShuttlePoint knob to highlight STEP UNIT and press [ENT] or move the ShuttlePoint knob to the right. 4. Move the ShuttlePoint knob to highlight and choose Dist or Time and press [ENT] or move the ShuttlePoint knob to the right. Figure 10 -Distance Units and Time Units 5. Move the ShuttlePoint knob to highlight DISTANCE or TIME step interval and press [ENT] or move the ShuttlePoint knob to the right. 6. Move the ShuttlePoint knob up/down to the desired step value and press [ENT] or move the ShuttlePoint knob to the right. 7. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown. 10.0 TRACKING You may have to take a few trips to see how you like the Distance or Time Interval setup on the previous step. When using the tracking feature you will notice every time a Track Point is layed down on the Chart page a small filled in circle is shown on the Track line. If you move the cursor over the active track line, a popup window will be shown with the Time, Water Temperature (shown when FF520 is connected), Speed and Course Over Ground (COG): this is very useful if you are fishing and want to review the conditions where the fish were being caught. CP500 Page 55 Figure 10.0 - Tracking 10.0.0 Saving and starting a new Track A Track is automatically saved to memory. To start a new Track: 1. Press [MENU]....

Questo manuale è adatto anche per i modelli :
Sounders - CP500 (2.58 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie