• Do not operate appliance before reading and understanding operating instructions. Failure to operate appliance according to operating instructions could cause fire or injury. • Risk of burns. The appliance should be turned off and cooled before servicing. • Do not install damaged, incomplete or substitute components. • Young children should be carefully supervised when they are in the vicinity of the appliance. Toddlers, young children and others may be susceptible to accidental contact burns. A physical barrier is recommended if there are at risk individuals in the house. To restrict access to an appliance or stove, install an adjustable safety gate to keep toddlers, young children and other at risk individuals out of the vicinity and away from hot surfaces. • Ensure you have incorporated adequate safety measure to protect infants/toddlers from touching hot surfaces. • Under no circumstances should this appliance be modified. • Keep the packaging material out of reach of children and dispose of the material in a safe manner. As with all plastic bags, these are not toys and should be kept away from children and infants. • Do not leave appliance unattended when in use. • For Outdoor use only. • This appliance must not be used for cooking. • This unit is not for use with solid fuel. • Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment. • This appliance shall be used ONLY outdoors in a well-ventilated space and shall NOT be used inside a building, garage, or any other enclosed area. • Cylinders must be stored outdoors in a well-ventilated area out of reach of children. Disconnected cylinders must have threaded valve plugs tightly installed and must not be stored in a building, garage or any other enclosed area. • Storage of this appliance indoors is permissible only if it has been disconnected from its fuel supply (natural gas line or LP gas cylinder). • If it is evident there is excessive abrasion or wear, or the hose is cut, it must be replaced prior to the appliance being put into operation. • Clothing or other flammable materials should not be hung from the appliance, or placed on or near the appliance. • Any guard or other protective device removed for servicing the appliance must be replaced prior to operating the appliance. • Inspect the fuel supply connection for signs of leakage (including the hose for LP models) before each use of the appliance. • The pressure regulator and hose assembly supplied with LP models must be used. Replacement pressure regulators and hose assemblies must be those specified in this manual. • The LP gas supply cylinder used with LP models must be constructed and marked in accordance with the specifications for LP-gas cylinders as required by the U.S. Department of Transportation (DOT) or the Canadian Transport Commission (CTC). • The LP gas cylinder supply system must be arranged for vapour withdrawal. • The LP-gas cylinder used must include a collar to protect the cylinder valve. • When an LP model is not in use, the LP-gas must be turned off at the supply cylinder. • To extend the life of your appliance, protect and cover it from the elements when not in use. • This product must be installed by a licensed plumber or gas fitter when installed within the commonwealth of Massachusetts. GENERAL INFORMATION This appliance should be installed and serviced by a qualified installer to conform with local codes. Installation practices vary from region to region and it is important to know the specifics that apply to your area, for example: in Massachusetts State: • The appliance off valve must be a “T” handle gas cock. • The flexible connector must not be longer than 36 inches. The installation must conform with local codes or in the absence of local codes, with the National Fuel Gas Code ANSI Z223.1/INFPA 54 in the United States or CSA B149.1, Natural and Propane Installation code in Canada. The appliance and its individual shut off valve must be disconnected from the gas supply piping system during any pressure testing of the system at test pressures in excess of 1/2 psig (3.5kPa). This appliance must be isolated from the gas supply piping system by closing its individual manual shut off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5kPa). The following clearances to combustible materials must be maintained: Sides (all around) - 24 inches (610mm) Top - 72 inches (1.830m) • Always keep the appliance area clear and free from combustible materials, gasoline, and other flammable vapours and liquids. • Do not locate appliance where it can get excessively wet. • Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the unit and to replace any part of t...