|
Facilità d'uso
SECURING FUSION FRAME TO THE FIRE 3.1 Access to the controls is behind the drop down lower cover. There are two fixing brackets either side of the controls: • Secure frame to the firebox at the base with screws supplied to ensure rigid fixing, Diagram 3 3AR2169 USER INSTRUCTIONS 1. CONTROLS ACCESS To access the fire's controls with a Futura Frame fitted: • Push the control panel firmly in the centre to release the magnetic catch Details of the controls (and Replacing the Batteries, if applicable) are given in the User section of the fire’s Instruction manual. 2. CLEANING THE FRAME Only clean the frame when it is cold. • Clean the glass with a non-abrasive proprietary glass cleaner and wipe over with a soft cloth INSTALLATIONINSTRUCTIONSCovering Models 8687 1. GENERAL 1.1 These instructions are supplemental to, and must be read in conjunction with, the Installation Instructions (PR0741 for E-Studio & Logic E-Box Conventional Flue and the Balanced Flue version in PR0776) supplied with the fire. 1.2 Fitting of the Futura frame must be carried out after the appliance has been fully installed and commissioning tests completed. 2. PREPARATION OF WALL FIXING FOR FUTURA The Futura is in two parts: a back panel which fits to the wall; a front panel that hooks onto the fixed back panel. 4.1 Back Panel The back panel hooks onto a wall bracket (supplied). • Find the fire's centre point across its width and mark • Mark 1081 mm from the hearth or base of appliance (if wall mounted) to establish the correct height • Centre the wall bracket above the fire and at the distance from the hearth or base of appliance (if wall mounted) shown in Diagram 1 1AR2170height measured to the centre top of bracket = 1081mmcentre point1081mm 4.2 To fix the wall bracket: • Secure the bracket into place with the screws supplied • Lift and hook the back panel onto the bracket • Centre the back panel, Diagram 2 • Secure the back panel through the firebox using the fixings next to the controls, Diagram 3 2AR2171 3AR2174 Futura Covering the following frames: Futura: Model number 8687 4.3 Front There are two hook-shaped inlets on each side at the top of the Front • Hook onto the studs at either side of the fixed back panel, Diagram 4 4AR2172 5. SECURING FUTURA FRAME TO THE FIRE 5.1 Access to the controls is behind the drop down lower cover. • Push the door of the controls firmly in the centre to release the magnetic catch 5AR2173Fixingpoint There are two fixing brackets either side of the controls: • Secure frame to the firebox at the base with screws supplied to ensure rigid fixing, Diagram 5 Futura Covering the following frames: Futura: Model number 8687 Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG Tel: (01392) 261999 Fax: (01392) 444148 E-mail: info@gazco.com A member of the Stovax Group ...
Questo manuale è adatto anche per i modelli :Camini - Fusion 8687 (134.08 kb)
Camini - Fusion 8699 IR (134.08 kb)