valutazioni - 3, GPA: 3.3 ( )

Produttore : Stovax File Size : 2.16 mb File Nome : Lingua di insegnamento:

• This appliance is not designed to burn wood. Any attempt to do so could cause irreparable damage to appliance and prove hazardous to your safety. • If logs are not installed according to the log installation instructions, flame impingement and improper combustion could occur and result in soot and/or excessive production of carbon monoxide (CO), a colorless, odorless, toxic gas. SLDVT-30 and 35 - Install the four logs as Follows: Carefully position the ceramic fiber logs over the burner as shown in Figure 9. Logs should be placed in the order shown and per the following instructions. 1.. Place the left front log (1) as shown. Position it on the two left front log brackets. 2.. Place the right front log (2) as shown. Position it on the two right front log brackets. 3.. Place the left rear log (3) as shown. Position it on the upper and lower left rear log brackets. 4.. Place the right rear log (4) as shown. Position it on the right rear log bracket. Note that the hole on the bottom of the right rear log rests over the "Nub" on the right front log. SLDVT-40 - Install the four logs and Ember Chunk as Follows: Carefully position the ceramic fiber logs over the burner as shown in Figure 10. Logs should be placed in the order shown and per the following instructions. 1.. Place the ember chunk (1) over the tab on the rear log support as shown. 2.. Place the left front log (2) as shown. Position it on the two left front log brackets. 3.. Place the right front log (3) as shown. Position it on the two right front log brackets. 4.. Place the left rear log (4) as shown. Position it on the left rear log bracket. 5.. Place the right rear log (5) as shown. Position it on the right rear log bracket. Note that the hole on the bottom of the right rear log rests over the "Nub" on the right front log. SLDVT-45 - Install the five logs as Follows: Carefully position the ceramic fiber logs over the burner as shown in Figure 11. Logs should be placed in the order shown and per the following instructions. 1.. Place the left front log (1) as shown. Position the holes on the bottom of the log on the two left front log brackets. 2.. Place the right front log (2) as shown. Position the holes on the bottom of the log on the two right front log brackets. 3.. Place the center log (3) over the center and right rear log brackets as shown. 4.. Place the left rear log (4) as shown. Position the holes on the bottom of the log on the left rear log brackets. Log also rests on center log (3). 5.. Place the right rear log (5) as shown. Rest the bottom of the log over the groove on the center log. SUPERIOR SUPERIORDIRECT-VENT GAS FIREPLACES • MODELS SLDVT-30/35/40/45 • CARE AND OPERATION INSTRUCTIONS SLDVT-30 AND SLDVT-35 LOG PLACEMENT Step 2 3 Left Rear Brackets Step 1 Align hole at the bottom of left front log (1) over the left front brackets and the right front log over the right front brackets. 2 4 21 Right Rear Bracket Rockwool (Do Not Place Rockwool Over Burner Slots) 1 Right Fron...

Scarica la tua

Per scaricare, digitare 2 cifre :