valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
1-4 button (29) lights up and the 1-4 function is turned on. • After manual brew cycle is complete, function and button light turn off. NOTE: Press 1-4 (29) within 25 seconds of starting the manual brew cycle to turn off the 1-4 function. TSB button (Time Since Brew) This function indicates the time that has past since the coffee has been brewed. After brewing is complete and buzzer sounds twice, press TSB (25) to see elapsed time (in minutes and hours). After 3 seconds the LCD display (31) returns to default view. Setting and activating the Auto Program Function Set the brewing time so that fresh brewed coffee is ready when you want it. NOTE: Program setting is only possible when clock time is set. • Press prog (24) once and operate hr (28) and min (26) buttons (Setting time) to set the program start time. • Press 1-4 (29) to include 1-4 function in the program. 1-4 button (29) lights up for 3 seconds. • Press prog (24) or auto (23) to save settings. NOTE: The program will be stored automatically if no button is operated for 3 seconds and the clock time is displayed. • To change or view program settings press prog (24) again. The program start time appears on the LCD display (31) and 1-4 button (29) lights up (if activated in the program) for 3 seconds. Press hr (28) and min (26) to modify the program (Setting time). • Press auto (23) to activate the program. auto button (23) lights up and the LCD display (31) shows program start time for 2 seconds. Brewing will start after the program start time is reached. NOTE: Program activation is possible if (30) is turned off. operation NOTE: When program function is running, the auto button (23) light will go out and the 1-4 button (29) does not illuminate - even if activated. You can deactivate the program before it starts by pressing auto (23) again. NOTE: Program function will be deleted if you unplug the coffee maker from the outlet for more than 14 seconds. cleaning Proper maintenance will ensure years of service from your appliance. Clean the appliance after every use. This appliance contains no user serviceable parts and requires little maintenance. Leave servicing or repairs to a qualified personnel. WARNING: Unplug the appliance and allow to cool before cleaning. CAUTION: • Do not immerse the coffee maker, or the power cord with plug (13) into water or any liquids (ill. i). • Clean the housing (7) and keep warm plate (12) with a clean, damp cloth. CAUTION: Do not use abrasive pads or alcohol. • Remove the carafe (14), permanent filter (21) and the filter basket (20) from the coffee maker. CAUTION: The carafe (14) is dishwasher-safe. Wash carafe (14), carafe lid (16), filter basket (20) and permanent filter (21) in hot, soapy water. Rinse and dry. • Use baking soda or mild cleaning agent to remove stains on the carafe (14). If stains are hard to remove, fill carafe (14) with hot water and add 2 tablespoons of dishwasher detergent. Wash and rinse after leaving water with detergent in carafe (14) overnight. • Ensure all parts are completely dry after washing and before use. NOTE: Do not dry inside of water tank (10) with a cloth, as lint may remain. • After cleaning, reassemble coffee maker. cleaning Automatic clean function The coffee maker is equipped with an automatic clean function. After 60 brewing cycles, the clean indicator/button (22) lights up. This indicates coffee maker should be cleaned by using the automatic clean function and the charcoal filter (17) should be replaced. NOTE: The coffee maker can continue to be used, when clean indicator/button (22) is on. • To begin the cleaning cycle, remove the charcoal filter (17) from the water tank (10). Fill the tank with a vinegar and water mixture (1/2 vinegar and 1/2 water) or a descaling product. Press clean (22) button for three seconds. The clean indicator/ button (22) flashes and the cleaning process begins. Cleaning process: • 24 cycles of 7 seconds brewing and 21 seconds off • 30 minutes rest • Brewing the remaining descaling solution • After cleaning process is complete the clean indicator/button (22) goes off. Fill water tank (10) with clean water and run one brewing cycle to rinse the coffee maker. • Change the charcoal filter (17) (ill. k). Reinsert the charcoal filter to the coffee maker (ill. l). NOTE: You can use the cleaning function before reaching 60 cycles (especially if the water hardness is above normal). Press and hold clean indicator/button (22) for 3 seconds. NOTE: The Cleaning Process takes 60 minutes to complete. You cannot cancel the cleaning process before it is complete. Unplugging the machine only delays the cleaning process. troubleshOoting PROBLEM CAUSE SOLUTION Coffee leaks around filter basket (20) /drip stop valve (18) overflows Filter basket (20) is not mounted correctly or not tightened sufficiently There are coffee grounds on the edge of filter Coffee is ground too finely. This will clog the filter When using drip stop valve function, hot water continues to flow into...
Questo manuale è adatto anche per i modelli :Macchine da caffè - 169182 (1.72 mb)