valutazioni - 0, GPA: 0 ( )

Produttore : Philips File Size : 1.84 mb File Nome : Lingua di insegnamento:

vinegar).These descaling agents may damage your SENSEO® coffee machine. Only citric acid-based descalers are suitable for descaling the SENSEO® machine.This type of descaler descales the appliance without damaging it. For the correct amount, see under ‘Descaling procedure’ below. Each descaling mixture can be used only once. After use, the descaling mixture is no longer active. 3 We advise you to use the special SENSEO® Descaler (HD7012, HD7011, HD7006). Read the instructions on the package of the descaler. Note:The special SENSEO® descaler can be bought in the shops that sell SENSEO® machines or on the internet at Descaling procedure 1 2 3 Mix 50 grams of citric acid with 1 litre of water in a measuring jug. Stir until the powder is completely dissolved. Fill the water reservoir with the descaler mixture.Then put the water reservoir back into the coffee machine. (Fig. 29) Press the on/off button 3. (Fig. 10) The machine is ready for use when the light in the on/off button lights up continuously. 4 Place the 1-cup pod holder qwith a used coffee pod in it in the coffee machine. Close the lid and make sure it is properly locked. Note: Always put a used coffee pod in the pod holder when you descale the machine.This pod serves as a ‘filter’ to prevent the sieve in the pod holder from getting clogged with scale residue. 5 Put a bowl with a capacity of at least 1500ml under the spout to collect the descaling mixture. (Fig. 28) Note: Make sure the bowl is placed stably on the drip tray or the foot of the machine to prevent it from wobbling or toppling over during descaling.You can also use a square or rectangular container. 6 Press the 2-cup button qq and let the machine operate. Repeat this until the water reservoir is empty. (Fig. 30) Never interrupt the descaling process! 7 Repeat steps 1 to 6. Replace the used pod with another used pod to filter out the scale residue. Note:To descale properly, you have to use 2 litres of descaling mixture. Note: Make sure you push down the lid lever until it snaps home with a click.You can only start the descaling process when the lid is closed and the lid lever is properly locked. 8 Rinse the water reservoir with tap water. Fill the water reservoir up to the MAX indication with tap water and repeat steps 3 to 6. Note: Do not refill the water reservoir with used hot water or the used descaling mixture. 9 Fill the water reservoir with fresh tap water up to the MAX indication again and repeat steps 3 to 6 once more. Note: Always rinse the machine by letting it empty two full water reservoirs. Note:You can also rinse the machine by letting it complete two flushing cycles as described in ‘Flushing’ in chapter ‘Cleaning’. 10 Remove the used pad and clean the pod holder after descaling to prevent the sieve in the centre from getting clogged. Frost-free storage If the machine has already been used and therefore has been flushed with water, you may only use and store it in a frost-free place to prevent it from becoming damaged. Replacement All removable par ts can be ordered from your Philips dealer or a Philips service centre. Environment - Do not throw away the machine with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment (Fig. 31). Guarantee & service If you need ser vice or information or if you have a problem, please visit the Philips website at or contact the Ph...

Scarica la tua

Per scaricare, digitare 2 cifre :