valutazioni - 0, GPA: 0 ( )

Produttore : Philips File Size : 3.89 mb File Nome : Lingua di insegnamento:

EXTRA: power light is off after having turned the machine ON and waited for a few minutes. PREMIUM: the brew lights and are not blinking. » The machine is not connected to the power source. » Connect the machine to the power source. » Contact Saeco customer service. The machine requires a lot of time to heat up. » The machine has limescale build-up. » Descale the machine. The pump is very noisy. » No water in the tank. » Circuit is not primed. » The tank with fresh drinking water. » Prime the water circuit. The loading lever doesn’t reach the brewing position. » Dregdrawer full. » Pod inserted incorrectly. » Empty out the dregdrawer. » Repeat the sequence, lever in the off position, lever in the brewing position; if that is not enough remove the pod manually from the compartment after unplugging the machine. The coffee is cold. » EXTRA: the brew light was off when the brew button was pressed. » Wait until the indicator light turns on. The coffee is brewed too fast, the brewed coffee is not creamy. » Pod already used. » Place the lever back in the off position and insert a new pod. The coffee is not brewed and some steam comes out from the pod compartment. » The loading lever was not set to the brewing position. » Set the loading lever to the brewing position. Coffee is not brewed or brewed in drips only. » Dispensing spout is clogged. » Circuit is not primed. » Clean the dispensing spout. » Prime the water circuit. The pods, after they have been used, have holes only on the upper film. » Circuit is not primed. » Prime the water circuit. Hot water/steam not dispensed. » Hot water/steam wand is clogged. » Clean the wand with a needle (the machine needs to be unplugged and the steam/hot water knob needs to be closed). The milk does not froth. » Not suitable milk. » The milk is too hot. » EXTRA: the steam light was off when the steam was dispensed. » Use fresh, partially skimmed milk. » Use milk at refrigerator temperature. » EXTRA: press the witch and wait until the indicator light turns on. Please contact a Saeco authorized service center for any faults not covered in the above table or when the suggested solutions do not solve the problem. TECHNICAL SPECIFICATIONS · Nominal Voltage - Power Rating - Power Supply: See label on the appliance · Dimensions: Height Width Depth 12” (305 mm) 9.25” (235 mm) 13” (330 mm) · Weight: about 11 lbs. (5 kg) · Water tank: 34 oz. (1 lt.) - Removable type · Housing Material: ABS - Thermoplastic · Power Cord Length: 47” (1.2 m) · Control Panel: Top of machine · Boiler: Stainless steel · Safety Devices: Boiler pressure safety valve · Thermal fuse (EXTRA and PREMIUM versions) · Safety thermostat (PREMIUM version) 2006/42 CE - 2004/108 CE - 2006/95 CE FR SOLUTIONS AUX PROBLEMES LES PLUS COMMUNS Probleme repere Causes possibles Solution La machine ne se met pas en marche. EXTRA: voyant eteint apres avoir appuye sur l'interrupteur general et attendu pendant quelques minutes. PREMIUM: les voyants et ne clignotent pas. » La...

Scarica la tua

Per scaricare, digitare 2 cifre :