|
Facilità d'uso
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Products may not be exactly as shown. Features, performance, and specifications may vary depending on operating environment and are subject to change without notice. Copyright © ATI Technologies Inc. 2000. All rights reserved. Printed in Canada Using Video In Capture full motion or still image video Your new RADEON™ graphics card has Video In (also known as Composite In) capability for capturing full motion or still image video. Just attach a video device such as a VCR, camcorder, or laser disk player to the Video In connector on the back of your new graphic card. Connecting a Video Device To connect your computer to a video device such as a VCR, camcorder, or laser disk player, attach a composite cable from the Composite Output connector on your VCR, camcorder, or laser disk player to the Video In on your graphic card. Most video devices such as VCRs, camcorders, and laser disk players have a Composite Output, alsoreferred toasanRCA output. Connecting Your video device 1 Turn off your computer and your VCR, camcorder, or laser disk player. 2 Ensure your graphics card is installed correctly. 3 Locate the Composite Output on your VCR, camcorder, or laser disk player. 4 Looking at the back of your computer, locate your graphics card. Using a Composite cable, attach one end of the cable to the Video In on your graphics card and the other to the Composite Output on your video device. 5 Turn on your computer and your video device. 6 Use the ATI Multimedia Center to capture streaming Video or still images. For detailed information on video capture, and various capture formats available, refer to the Online User’s Guide included with your ATI Install CD ROM. Using Video Out View your PC’s display on a television! Your new RADEON™ graphics card has Video Out (also known as TV Out) capability. Just attach your new card to a television, a monitor, or both. You can even attach your graphics card to your VCR and record your computer’s display. Television display is ideal for playing games, giving presentations, watching movies, and browsing the Internet. The following tips will help you get the most out of your Video Out feature. READ ME FIRST IMPORTANT INFORMATION for European Customers • Some PC monitors in Europe cannot be used simultaneously with television display. When you enable television display in Europe, the refresh rate for the monitor and television is set to 50Hz. Some monitors may not support this refresh rate and could be damaged. Please check the documentation supplied with your monitor to see if your monitor supports a refresh rate of 50Hz. If your monitor does not support 50 Hz (or you are not sure), then turn off your monitor before turning on your computer when using your television as a display. For information about how to disable television display, see Enabling and Disabling the Television Display on page 5. • Some televisions in Europe may use a SCART connection. If you use SCART, read Using SCART Connectors for European Televisions on page 5 before attempting to connect your PC to your television. Connecting your PC to a television or a VCR To connect your computer to a television or a VCR, attach a connector cable from the television (or VCR) to your card. Most televisions and VCRs have a Composite video input, also referred to as a phono jack or RCA input. A growing number of televisions and VCRs have another type of video input called S-Video or S-VHS. An S-Video connection produces a higher quality display than Composite video. If your television has cable input only, which is the case on older units, you can connect your graphics card to your television using your VCR or an RF modulator (available in most electronics stores). RADEON™ Using Video In/Video Out Connecting Your Video Out Graphics Card to a Television or VCR 1 Turn off your computer and your television or VCR. 2 Ensure your graphics card is installed correctly. To use television display, you need the enhanced ATI driver (version 6.0 or greater) installed on your system. For information about placing the card in your computer and installing the enhanced ATI driver, see the Getting Started guide. 3 Determine if your television or VCR has an S-Video or Composite video connection. 4 Looking at the back of your computer, locate your graphics card. Using an S-Video or Composite cable, attach one end of the cable to your graphics card and the other to your television or VCR. (See Figure 1. Connecting your ATI RADEON™ card to a TV or VCR below.) 5 Turn on your computer and your television or VCR. 6 To turn your television display on and off, please see Enabling and Disabling the Television Display on page 5. If there is no display on your television, you may need to switch your television to video display. For more information, see the documentation supplied with your television. If you have a television connected to your VCR, you ...
Questo manuale è adatto anche per i modelli :Accessori computer - RADEON 117-40122-20 (454.84 kb)