|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
AGP 4X/8X notch Caution: AGP 2X(3.3V) card is not supported by VIA® KT400. You might experience system unable to boot up normally. Please insert an AGP 4X/8X(1.5V) card Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X (1.5V) mode by adjusting the jumper. The factory default for this card is 2X(3.3V). The GA-7VA (or any AGP 4X only) motherboards might not function properly, if you install this card without switching the jumper to 4X(1.5V) mode in it. Example 2: Some ATi Rage 128 Pro graphics cards made by “Power Color”, the graphics card manufacturer & some SiS 305 cards, their golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X(3.3V) only. The GA-7VA (or any AGP 4X only) motherboards might not function properly, If you install this card in it. Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage 128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work fine with VIA® KT400 based motherboards. . The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. . Third-party brands and names are the property of their respective owners. . Please do not remove any labels on motherboard, thismay void the warranty of this motherboard. . Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. . EN 55011 . EN 55013 . EN 55014 . EN 55015 . EN 55020 . EN 55022 . DIN VDE 0855 . part 10 . part 12 . CE marking . EN 60065 . EN 60335 Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Trading GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-7VA is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive Limits and methods of measurement of radio disturbance characteristics of industrial,scientific and medical (ISM high frequency equipment Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment Limits and methods of measurement of radio disturbance characteristics of household electrical appliances, portable tools and similar electrical apparatus Limits and methods of measurement of radio disturbance characteristics of fluorescent lamps and luminaries Immunity from radio interference of broadcast receivers and associated equipment Limits and methods of measurement of radio disturbance characteristics of information technology equipment Cabled distribution systems; Equipment for receiving and/or distribution from sound and television signals . EN 61000-3-2* . EN 60555-2 . EN 61000-3-3* . EN 60555-3 . EN 50081-1 . EN 50082-1 . EN 55081-2 . EN 55082-2 . ENV 55104 . EN50091-2 (EC conformity marking) Disturbances in supply systems cause by household appliances and similar electrical equipment “Harmonics” Disturbances in supply systems cause by household appliances and similar electrical equipment “Voltage fluctuations” Generic emission standard Part 1: Residual commercial and light industry Generic immunity standard Part 1: Residual commercial and light industry Generic emission standard Part 2: Industrial environment Generic emission standard Part 2: Industrial environment lmmunity requirements for household appliances tools and similar apparatus EMC requirements for uninterruptible power systems (UPS) The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC Safety requirements for mains operated . EN 60950 Safety for information technology equipment electronic and related apparatus for including electrical bussiness equipment household and similar general use Safety of household and similar . EN 50091-1 General and Safety requirments for electrical appliances uninterruptible power systems (UPS) Manufacturer/Importer Signature: . (Stamp) Date : September 16, 2002 Name: Timmy Huang DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible PartName: G.B.T. INC. (U.S.A.) Address: 17358 Railroad Street City of Industry, CA 91748 Phone/Fax No:(818) 854-9338/ (818) 854-9339 hereby declares that the product Product Name: Motherboard Model Number:GA-7VA Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109 (a),Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation. Representative Per...