|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Information in this publication is subject to change without notice. © 2008–2011 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell™, the DELL logo, PowerEdge™, PowerConnect™, and FlexAddress™ are trademarks of Dell Inc. Cisco® is a registered trademark of Cisco Systems, Inc. Microsoft®, Windows®, and Active Directory® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. March 2011 Rev. A05 Contents 1 About Your System . . . . . . . . . . . . . . . . . . 7 System Overview . . . . . . . . . . . . . . . . . . . . . 7 LCD Module . . . . . . . . . . . . . . . . . . . . . . . 11 LCD Module Menus . . . . . . . . . . . . . . . . 12 Back-Panel Features . . . . . . . . . . . . . . . . . . 14 Blades. . . . . . . . . . . . . . . . . . . . . . . . . . 15 CMC Module. . . . . . . . . . . . . . . . . . . . . . . 22 CMC Daisy Chaining (Enclosure Stacking) . . . . 23 iKVM Switch Module. . . . . . . . . . . . . . . . . . 25 2 Initial System Configuration . . . . . . . . . . 27 Before You Begin . . . . . . . . . . . . . . . . . . . . 27 Power Requirements . . . . . . . . . . . . . . . . 27 Network Information . . . . . . . . . . . . . . . . 27 Initial Setup Sequence . . . . . . . . . . . . . . . . . 27 Configuring the CMC . . . . . . . . . . . . . . . . . . 28 Initial CMC Network Configuration . . . . . . . . 28 Logging in to the CMC Using the Web-Based Interface . . . . . . . . . . . . . . . 31 Adding and Managing CMC Users . . . . . . . . . 32 Configuring iDRAC Networking Using the Web-Based Interface . . . . . . . . . . . . . . . 33 Contents Setting the First Boot Device for Servers . . . . . 34 Configuring and Managing Power . . . . . . . . . 35 Installing or Updating the CMC Firmware . . . . . 35 Configuring the Optional iKVM Switch Module . . . . 38 Enabling iKVM Access to the Dell CMC Console . . . . . . . . . . . . . . . . . . . . 38 Updating the iKVM Firmware . . . . . . . . . . . . 38 Tiering the Avocent iKVM Switch From an Analog KVM Switch . . . . . . . . . . . . . . . . 39 Tiering the Avocent iKVM Switch From a Digital KVM Switch . . . . . . . . . . . . . . . . . 40 Viewing and Selecting Servers . . . . . . . . . . 41 FlexAddress . . . . . . . . . . . . . . . . . . . . . . . 43 Activating FlexAddress . . . . . . . . . . . . . . . 44 3 Configuring the I/O Modules . . . . . . . . . . 47 Overview. . . . . . . . . . . . . . . . . . . . . . . . . 47 Identifying Midplane Version . . . . . . . . . . . . 49 Before You Begin . . . . . . . . . . . . . . . . . . . . 52 Network Information . . . . . . . . . . . . . . . . 52 Switch Modules . . . . . . . . . . . . . . . . . . . . . 52 Configuring a Switch Module Network Ethernet Port Using the Web-Based Interface . . . . . . . . . . . . . . . 52 Dell PowerConnect-KR 8024-k Switch . . . . . . . 53 Dell M8428-k 10 Gb Converged Network Switch . . . . . . . . . . . . . . . . . . 55 Mellanox M2401G DDR Infiniband Switch I/O Module . . . . . . . . . . . . . . . . . 57 Mellanox M3601Q QDR Infiniband Switch I/O Module . . . . . . . . . . . . . . . . . 58 Contents Cisco SFS M7000e Infiniband Switch I/O Module . . . . . . . . . . . . . . . . . 60 Cisco Catalyst Ethernet Switch I/O Modules . . . 61 PowerConnect M6220 Ethernet Switch I/O Module . . . . . . . . . . . . . . . . . . . . . 63 PowerConnect M6348 1 Gb Ethernet Switch I/O Module . . . . . . . . . . . . . . . . . . . . . 65 PowerConnect M8024 10 Gb Ethernet Switch I/O Module . . . . . . . . . . . . . . . . . . . . . 67 Brocade M4424 SAN I/O Module . . . . . . . . . 69 Brocade M5424 FC8 I/O Module . . . . . . . . . . 71 Dell 8/4 Gbps FC SAN Module . . . . . . . . . . . 73 Pass-Through Modules . . . . . . . . . . . . . . . . . 75 Dell 10 GbE KR Pass-Through I/O Module . . . . . 75 Dell 8/4 Gbps Fibre Channel Pass-Through I/O Module . . . . . . . . . . . . . . . . . . . . . 77 10 Gb Ethernet Pass-Through Module II . . . . . . 79 10 Gb Ethernet Pass-Through I/O Module . . . . . 81 10/100/1000 Mb Ethernet Pass-Through I/O Module . . . . . . . . . . . . . . . . . . . . . 83 4G Fibre Channel Pass-Through I/O Module . . . . 85 Contents Contents 1 About Your System System Overview Your system can include up to 16 half-height blades (server modules), eight full-height blades, or a mixture of the two blade types (see Figure 1-1, Figure 1-2, and Figure 1-3). To function as a system, a blade is inserted into a Dell PowerEdge M1000e enclosure (chassis) that supports power supplies, fan modules, a Chassis Management Controller (CMC) module, an...