USB MICROCONTROLLERS 8-bit Microcontrollers with Integrated USB Controller Ready to Go in No Time . .. USB MICROCONTROLLERS 8-bit Microcontrollers with Integrated USB Controller Ready to Go in No Time Atmel®’s family of 8-bit microcontrollers supports a wide range of USB applications: high-end keyboards, mice, phone accessories, toys, serial adapters and industrial equipment. An on-chip bootloader permits very quick firmware download from a PC, without using a parallel programmer or dedicated ha

1-1 Section 2 Getting Started...................................................................................... 2-3 2.1 Features....................................................................................................2-3 2.1.1 System................................................................................................2-3 2.1.2 Audio Player .......................................................................................2-3 2.1.3 USB Device .........................

1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL (81) 3-3523-3551 FAX (81) 3-3523-7581 Product Contact 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 USA TEL 1(719) 576-3300 FAX 1(719) 540-1759 Literature Requests Web Site © Atmel Corporation 2003. All rights reserved. Atmel® and combinations thereof are registered trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be the trademarks of others. REV 2038B-08/03/7K Atmel’s AT88RF020 low-cost

/ / & m Si*« Key Features • A Family of Devices with User Memories from 1 Kbit to 64 Kbits: 1K, 2K, 4K, 8K, 16K, 32K, 64K Bits • Symmetrical Dynamic Mutual Authentication with 64-bit Cryptographic Keys • Encrypted Passwords with Attempts Counters • Stream Encryption Ensures Data Privacy • Antitearing Recovers Data in Case of Power Loss • Contactless 13.56-MHz Interface, Compliant with ISO/IEC 14443 Type B • Integrated 82 pF Tuning Capacitor • High Reliability Memory, 100K Write Cycl

Read and Write access requirements for each user zone are programmed by the customer during card personalization. The device’s secret keys for mutual authentication and encryption are defined using a customer selected algorithm. Only a computer knowing both the CryptoRF and customer algorithms can provide the required authentication codes. Product Features • Contactless 13.56 MHz RF Communications Interface - ISO/IEC 14443-2: 2001 Type B Compliant - ISO/IEC 14443-3: 2001 Type B Compliant Ant

The AT89C5132 includes 64K Bytes of Flash memory and allows In-System Programming through an embedded 4K Bytes of Boot Flash Memory. The AT89C5132 include 2304 Bytes of RAM memory. The AT89C5132 provides all the necessary features for man-machine interface including, timers, keyboard port, serial or parallel interface (USB, SPI, IDE), ADC input, I2S output, and all external memory interface (NAND or NOR Flash, SmartMedia, MultiMedia, DataFlash cards). •Flash Recorder/Writer •PDA, Camera, Mobile

It is intended to familiarize the user with the CAP concept and architecture, and is an ideal vehicle for students of electronic engineering to consolidate their knowledge of system- on-chip design, both hardware and software. CAP comprises a microcontroller-based system-on-chip with ARM® processor, memories, peripherals and standard interfaces, together with a Metal Programmable (MP) Block for application-specific functions. The CAP Starter Kit facilitates the mapping of application-specific IP

A Starter Kit . User Guide 6409A–ATARM–30-Jun-08 6409A–ATARM–30-Jun-08 Section 1 Overview ....................................................................................................................1-1 1.1 Scope................................................................................................................................. 1-1 1.2 Deliverables ...................................................................................................................... 1-1 1.3 The

Description The ATA5283 is a 125 kHz ultra-low power receiver used for the wake-up function of Tire Pressure Monitoring (TPM) application. The sensitive input stage of the IC amplifies and demodulates the carrier signal from the antenna coil to a digital output signal for a microcontroller. During the standby mode the preamble detection unit monitors the incoming signal and activates the wake-up output and the data output, if the IC receives a proper 125 kHz carrier signal. By combining the IC w

On delivery the AVR is fleshed with the current firmware and does not need any special programming or settings. Check that jumper J3 on the antenna interface is in the default position en. 2.2Software Installation The ATAK2270 host installation software as well as the related datasheets and documentation are provided by the CD-ROM included in the kit. Furthermore, the up-to-date software and documentation are available via the web. Execute the setup.exe file found on the CD-ROM to launch the ins