valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
For information on supported operating system revisions and server software with a CX3–series or CX-series storage system, refer to the E-Lab™ Interoperability Navigator on the Powerlink website. For AX-series storage systems, refer to the Support Matrix (Supported Configurations) or the Supported Configurations link on the Install web page for your storage system. Note: This document uses the term CX3-series to refer to CX3 model 10 systems, CX3 model 20 systems, CX3 model 40 systems, and CX3 model 80 systems, and the term CX-series to refer to CX200, CX300-series, CX400, CX500-series, CX600, and CX700 storage systems, and the term AX-series to refer to AX150–series and AX100–series storage systems. Topics include: • About EMC Navisphere Software................................................... 3 • Finding current information........................................................... 8 • Installing and removing the Navisphere Storage System Initialization Utility .......................................................................................... 9 • Running the Navisphere Storage System Initialization Utility ........... 12 • Determining whether to install the host agent or server utility........... 17 • Requirements for the host agent, server utility, and CLI ................... 20 • Installing or removing the Navisphere Host Agent and CLI ............. 22 • Configuring the Navisphere Host Agent ......................................... 28 • Using the Event Monitor configuration file...................................... 30 • Running the Navisphere Host Agent .............................................. 31 • Installing and removing the Navisphere Server Utility..................... 34 • Running the Navisphere Server Utility ........................................... 37 • Installing and removing the Admsnap Utility.................................. 42 • Running the Admsnap Utility ........................................................ 46 EMC CLARiiON Server Support Products for Solaris Server Installation Guide About EMC Navisphere Software The following EMC® server-based software is available on the server support CD that shipped with your storage system or your upgrade kit (for AX-series systems upgrading to Navisphere Manager): • Navisphere® Storage System Initialization Utility • Navisphere Host Agent • Navisphere ServerUtility • Admsnap Utility • Navisphere Command Line Interface (CLI) About the Navisphere Storage System Initialization Utility For CX3-series and CX-series Fibre Channel storage systems, use the utility to discover storage systems, and set network parameters (IP address, subnet mask, and default gateway). Note: For CX-series storage systems, an authorized service provider must install and run the Initialization Utility. For AX-series storage systems, use the utility to discover storage systems, set network parameters (IP address, subnet mask, and default gateway), and create management user accounts. In addition, for AX150 iSCSI storage systems, use the utility to set network parameters for the storage system’s iSCSI data ports. You can run the Navisphere Storage System Initialization Utility from the server support CD or you can install it on a server that is connected to the storage system. We recommend that you install the utility on at least one server that is connected to the storage system. EMC CLARiiON Server Support Products for Solaris Server Installation Guide Note: The Navisphere Initialization Utility runs on servers attached to CX3-series, CX700, CX500-series, CX300-series, and AX-series storage systems. CX3 model 10 systems must be running FLARE® OE 03.24.010.5.xxx or later. CX3 model 20 systems, CX3 model 40 systems, and CX3 model 80 systems must be running FLARE OE 03.22.xxx.5.yyy or later. CX700, CX500-series, and CX300-series systems must be running FLARE OE 02.16.xxx.5.yyy or later. AX150-series systems must be running FLARE 02.20.xxx.5.yyy or later. AX100-series systems must be running FLARE OE 02.16.xxx.5.yyy or later. About the Navisphere Host Agent The host agent registers the server’s HBA (host bus adapter) with the attached storage system when the host agent service starts. This action sends the initiator records for each HBA to the storage system. Initiator records are used to control access to storage-system data. For legacy storage systems, the host agent will send the initiator records only if Access Logix™ software is installed. Theagent can thenretrieveinformation from the storage system automatically at startup or when requested by Manager or CLI. Thehostagent canalso: • Send drive mapping information to the attached CLARiiON® storage systems. • Monitor storage-system events and can notify personnel by email, page, or modem when any designated event occurs. • Retrieve LUN WWN (world wide name) and capacity information from Symmetrix® storage systems. The host agent runs on servers attached to CX3–series and CX–series. It also runs on servers...