|
Facilità d'uso
Attach the mounting brackets to vertical mounting rails. . Leaving the screws slightly loose. . Attach left and right front mounting ears to vertical rails. . Tighten the screws. . Attach the support brackets to chasis with M3.2*4.5mm screws x 6 pcs . Installation complete. . Pickup the unit. . Insert inner members of slides into the already mounted internal slide members in the rack. Model No. NBK-01 Section 2: How to Connect Console Terminal LCD Keyboard Drawer 2.1 On-screen Display Operation Untitled-1 Untitled-1 2.2 Membrane 2.2.1 Power ON Turn off all devices / servers and Cat5 IP serial console Make sure all cables / connectors are properly connected 2.2.2 Front Panel – Port LD Indications 16 ports Power Red Power on indication Link Orange 10BaseT Ethernet Connection Green 100BaseT Ethernet Connection Ready Green Blinking per second when system is busy Port LED Green Traffic Activity Reset Button Press reset button to reboot the unit Untitled-3 2.3 Configuring the Local Console Switch on the power on the rear of RTERM-17T-16 2.3.1 Entering SETUP Hold down the Alt key and then depress the Esc key to enter the SETUP mode. When you enter SETUP mode, and text on the screen temporarily disappears, and the main SETUP directory appears. When you leave the SETUP mode, the main SETUP directory disappears, and any text that was on the screen reappears. Caution: Scroll lock must be off for accessing setup menu by “Alt + Esc” key. Untitled-3 2.3.2 Saving and Exiting SETUP The first menu seen when entering SETUP mode serves as a directory to the other SETUP menus. When you depress F12 to exit Setup, you will return to this main directory and be given the option of saving your selections. The highlighted field at the right of the screen gives you the choice of saving or not saving parameter changes in the nonvolatile memory before returning the terminal to the normal operating mode. If you don’t save your setting before you leave the SETUP mode, any new selections will be lost when you power down the console terminal drawer. To save your SETUP selection, depress the Spacebar to change the save field at the right side of the screen from NO to YES before exiting SETUP. Depress F12 to exit SETUP mode and return to the normal display mode. Untitled-1 Untitled-1 The 16-port serial console drawer with serial-to-serial local access function which the data transfer can be between one designated serial port (ESP) and one of the other serial ports. . Select the access port and configure each setting & type in the value for Inactivity timeout . Press SPACE bar to select other itemts . Complete the configuration and select
Computer - RTERM-17T-16 (4.09 mb)