valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Computer - iMac (24-inch, Late 2006) (2.93 mb)
Computer - iMac (24-inch, Late 2006) (1.98 mb)
Facilità d'uso
Use the adapter only with a VESA mount that can support the weight of your 24-inch iMac. Your VESA Mount Adapter Kit contains: A A mount adapter A A flange A 1 screw A 2 bolts A A hex tool A A TORX tool A An access card You’ll also need a soft cloth and a flat work surface. Installing the VESA Mount Adapter on Your 24-inch iMac Follow these instructions to install the mount adapter on the back of your 24-inch iMac. You can then attach your iMac to a VESA-compliant mounting solution. To install the mount adapter: 1 Turn off your iMac and disconnect the power cord and all cables. 2 Turn your iMac so that the back is facing you, and then rotate the top forward until it won’t go any further. 3 Release the latch by inserting the access card in the space directly above the top of the stand. The access card should go into the space at a slight upward angle for about 3/4 of an inch. If it goes in farther, you’ve missed the latch, so try again. Access card English Important: Use only the access card provided with the kit for this step. Use of any other object or instrument could result in personal injury, and damage to your iMac. If your access card has become lost or damaged, go to diy/vesa to purchase a replacement access card. 4 Rotate your iMac forward another 10 degrees until the 8 screws on top of the stand are visible and the stand is locked in place. Important: Keep your iMac upright until the stand is locked in place. 5 Hold the sides of your iMac and carefully lay it down so that the screen is resting on a soft towel or cloth on a flat surface and the stand hangs over the edge of your work surface. English 6 Use the TORX tool to remove the 8 screws that attach the stand to the back of your iMac. You’ll need these screws to attach the flange to your iMac, so set them aside. TORX tool Hex tool 7 Remove the stand and put it in a safe place in case you want to reattach it. TORX tool English 8 Align the hole in the flange with the pin on the back of your iMac, and then use the TORX tool and the 8 screws you removed from the stand to attach the flange. Flange Pin Hole English 9 Place the mount adapter over the flange. Important: Keep the flange in the locked position while you attach the mount adapter. English 10 Use the TORX tool to screw the screw into the top of the mount adapter, and then use the hex tool and the two bolts to attach the mount adapter to the back of your iMac. Screw Bolt Bolt 11 Follow the instructions included with the VESA-compliant mounting solution to attach it to your 24-inch iMac. 12 Connect the power cord and cables to your iMac. English 99 101112101112 Adaptateur de monture VESA Mount Adapter de l’iMac 24 pouces Une fois l’adaptateur de monture VESA Mount Adapter installe, vous pouvez utiliser plusieurs solutions de montage conformes VESA avec votre iMac 24 pouces, telles qu’un bras articule ou un emplacement mural. Utilisez cet adaptateur uniquement avec une monture VESA qui peut supporter le poids de votre iMac 24 pouces. Votre kit d’adaptateur de monture VESA Mount Adapter contient : A un adaptateur de monture ; A une collerette ; A une vis ; A deux boulons ; A une cle hexagonale ; A une cle Torx ; A une carte d’acces. Vous aurez egalement besoin d’un tissu doux et d’une surface de travail plane. Installation de l’adaptateur de monture VESA Mount Adapter sur votre iMac 24 pouces Suivez ces instructions pour installer l’adaptateur de monture a l’arriere de votre iMac 24 pouces. Vous pourrez ensuite fixer votre iMac a une solution de montage conforme VESA. Pour installer l’adaptateur de monture : 1 Eteignez votre iMac puis debranchez le cable d’alimentati...