valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
4. Disconnect the cable from the logic board. (Figure 6)
5. Disconnect the other end of the cable from the front panel board and remove the cable
from the enclosure.
Figure 6
Installing the Replacement Front Panel Board Cable
1. Connect the replacement front panel board cable to the logic board.
2. Connect the replacement front panel board cable to the front panel board.
3. Replace the covers on the connectors on each end of the cable.
Closing the Computer
1. Replace the air deflector by inserting the three tabs on the bottom edge of the
deflector into the three slots in the bottom frame of the enclosure. Then swing the
deflector up flush against the top frame.
Important: Make sure you re-install the air deflector before replacing the access
panel. If the air deflector is not installed, the computer will not function properly.
2. Replace the access panel.
Note: Make sure the latch is in the up position before replacing the access panel. If
the latch is down, the access panel will not seat correctly in the enclosure.
3. Push the latch down to close and secure the access panel.
Warning: Never turn on the computer unless all of its internal and external parts are
in place and it is closed. Operating the computer when it is open or missing parts can
damage it or cause injury.
Power Mac G5 Front Panel Board Cable - 5
...