valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Computer - ThinkServer TD350 (247.06 kb)
Computer - ThinkServer TD350 (246.5 kb)
Computer - ThinkServer TD350 (264.8 kb)
Computer - ThinkServer TD350 (246.69 kb)
Facilità d'uso
Static Rail Kit and Cable Management Bar
Rack Installation Instructions
Important information about the ThinkServer Static Rail Kit and
Cable Management Bar
This document provides important information about the ThinkServer® static rail kit and cable management bar.
Store the document in a safe place for reference.
If you want to install a server into a rack cabinet, you need one set of rails. An optional cable management bar can
help you to manage your cables. Contact your local Service Provider to purchase a cable management bar. Then,
refer to the later part of this document for information about installing the cable management bar.
≥ 18 kg (39.7 lb)
≥ 32 kg (70.5 lb)
≥ 55 kg (121.2 lb)
Your rail kit package contains:
< 32 kg (70.5 lb)
< 55 kg (121.2 lb)
< 100 kg (220.5 lb)
One set of rails
CAUTION
The set of rails is designed for fixing a 4U servers into a rack cabinet without the flexibility of sliding in or out.
(“U” is the unit of measurement for defining the vertical space used by your server and 1U is equivalent to
Use safe practices when lifting.
4.445 cm or 1.75 inches.)
Before installing a server into a rack cabinet, remove all media from the drives and turn off all attached devices
Documentation
and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are
connected to the server.
A printed English version of this document is included in your package. Some other language versions are in
Portable Document Format (PDF) and provided on the documentation DVD that comes with your server.
Ensure that the room air temperature is below 35°C (95°F).
If you have ordered a cable management bar, it will be shipped in a separate package together with your rail kit.
Do not block any air vents; usually 15 cm (6 inches) of space provides proper airflow.
If any item is missing or damaged, contact your place of purchase. Ensure that you retain your proof of purchase
Do not leave open spaces above or below an installed server in your rack cabinet. To help prevent damage to
and packing material. They might be required to receive warranty service.
server components, always install a blank filler panel to cover the open space and to help ensure proper air
circulation.
About the rack cabinet
Install the server only in a rack cabinet with perforated doors for both security and proper airflow.
CAUTION: Be sure to read and understand the documentation that comes with the rack cabinet for safety
Start from the bottom of the rack cabinet for the server or device installation.
and cabling information. Before you install a server into the rack cabinet, also ensure that you read and
understand all safety information and guidelines in this document. Reading and understanding the
Install the heaviest server or device in the bottom of the rack cabinet.
information reduces the risk of personal injury and damage to your product.
Do not extend more than one server or device out of the rack cabinet at the same time.
The rack cabinet must meet one of the following requirements:
If possible, remove the doors and side panels of the rack cabinet to provide easier access during installation.
Standard 4-post (square-hole), 19-inch rack configuration compliant with EIA-310-E as defined by the
Do not overload the electrical outlet when you install multiple devices in the rack cabinet.
Electronic Industries Alliance
Connect all power cords to proper electrical outlets and properly manage all the cables in the rack cabinet.
Standard 4-post (unthreaded round-hole), 19-inch rack configuration compliant with EIA-310-E as defined by
Refer to the documentation that comes with the rack cabinet about managing cables.
the Electronic Industries Alliance
Do not place any object on top of rack-mounted devices.
The dimensions of the rack cabinet must meet the following requirements:
When you move or ship the rack cabinet, properly handle the installed servers first. Refer to the documentation
that comes with the rack cabinet and the documentation that comes with each rail kit for detailed information.
Installing a server into a rack cabinet (with static rail kit)
Before you begin, remove all the parts from the rail kit package and lay all the parts on a working surface. Measure
the rack before the installation to ensure that the rack can accommodate the static rail.
Notes:
If your server is already installed in a rack cabinet, go to the cable management bar installation part.
The holes in a mounting flange are separated into groups by measuring marks. The three holes between two
adjacent measuring marks form a group, which indicates 1U space. Note the measuring marks on a mounting
flange to help you correctly select a rack mounting area for the server. For more information about the
placement of the holes in a mounting flange, refer to the documentation that comes with the rack cabinet.
To install a server into a rack cabinet, do the following:
1.
Install the rail kit by doing the following:
a. Select a proper rack mounting area for the left static rail. Position the rear end of the left rail to the
mounting area. Ensure that the tabs on the rear end of the rail are aligned with the corresponding holes in
the mounting area. Press the latch
and push the rail until the rear end of the left static rail is firmly
secured to the mounting flange.
Rear mounting flange
If the holes in a mounting flange are round, the installation method is the same. Press the latch
and
Front mounting flange
push the rail until the inner round posts of the tabs are inserted into the corresponding holes. Then, the
rear end of the rail is firmly secured to the mounting flange.
Rack-cabinet front door
The following table explains the dimension requirements of the rack cabinet.
Item Dimensions
Description
A
609.6 – 914.4
Item A refers to the distance between the front mounting flange
and the rear
mm (24 – 36
mounting flange
. The distance must be 609.6 mm (24 inches) in minimum
inches)
and 914.4 mm (36 inches) in maximum.
B
> 474 mm
Item B refers to the internal width of the rail kit. The width must exceed 474 mm
(18.66 inches)
(18.66 inches).
1
D
> 60 mm (2.36
Item D refers to the distance between the front mounting flange
and the
inches)
inside of the rack-cabinet front door
. The distance must exceed 60 mm
(2.36 inches). This clearance is required for the chassis pull handles on the
LEFT
front of the server as well as air circulation through the cabinet.
L
> 950 mm (37.4
Item L refers to the distance between the front mounting flange
and the rear
inches)
of the rack cabinet. The distance must exceed 950 mm (37.4 inches). This
clearance is used to save adequate space for a cable management arm.
Read these guidelines first
Before you install the server into a rack cabinet, review the following guidelines. The guidelines help you in your
installation and avoid the risk of personal injury and damage to your product.
Two or more people are required to lift a server, move a server, or install a server into a rack cabinet. You also
can use a server-lifting tool for help.
First Edition (September 2014)
© Copyright Lenovo 2014.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services
Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-
05925.
...