valutazioni - 6, GPA: 4.8
(
)
)
|
Facilità d'uso
If it is left at the ON position, approximately 2.5 W of electricity will be used even if the indoor unit has been turned off with the remote control. • If operation is stopped, then restart immediately, the unit will resume operation only after 3 minutes. Heat Pump Model DBT: Dry Bulb Temp WBT: Wet Bulb Temp Maximum Temperature Minimum Temperature WBT 23 11 DBT 43 16 WBT 26 11 Indoor Outdoor Unit in °C DBT 32 16 DBT: Dry Bulb Temp WBT: Wet Bulb Temp Maximum Temperature-Cooling (Maximum Temperature-Heating) Minimum Temperature-Cooling (Minimum Temperature-Heating) DBT 32 (30) 16 (16) WBT 23 (-) 11 (-) DBT 43 (24) 16 (-5) WBT 26 (18) 11 (-6) Indoor Outdoor Unit in °C 36° 36° 61° COOL / DRY Operation AUTO FAN Operation AUTO SETTING THE TIMER Ensure that the current time is correct before setting the timer. The timer cannot be set if the time display is flashing. ON-TIMER Operation To start the air conditioner operation automatically. • Press 1 to set the operation. • Press 2 to increase or decrease the time. • Then press 3. • To cancel this operation, press 4. OFF-TIMER Operation To stop the air conditioner operation automatically. • Press 5 to set the operation. • Press 2 to increase or decrease the time. • Then press 3. • To cancel this operation, press 4. Timer Mode Operation Details • When the ON-Timer is set, operation will start before the actual set time. This is to enable the room temperature reaches the set temperature at the set time. • Once the ON/OFF Timer is set, operation will start/ stop at the set time everyday. • The current time is not displayed when the timers are set. • When both timers are used together, the TIMER mode indicator on the indoor unit remains lit even when the operation is stopped by the OFF-TIMER. CONVENIENCE OPERATION Powerful Mode Operation To obtain the set temperature quickly. • Press 6. *Powerful mode indicator (orange) on the indoor unit will light up. *Powerful mode will operate for 15 minutes only. • To cancel this operation, press once more. Powerful Mode Operation Details • The changes of the temperature and airflow volume are automatic. • The remote control display remains unchanged. • If operation mode button is pressed, powerful operation will be cancelled. • During FAN – Air circulation operation, the powerful operation are not available. (cooling model only) Quiet Mode Operation To provide quiet operation. • Press 7. *Quiet mode indicator on the indoor unit will light up. • To cancel this operation, press once more. Operation Details • Air flow sound will reduce during operation. Ionizer Mode Operation Produce negative ion for fresh air. • Press 8. *Ion mode indicator on the indoor unit will light up. • To cancel this operation, press once more. Operation Details • Air conditioner ON: Provide negative ion during operation. • Air conditioner OFF: Provide negative ion with FAN operation. • If blinking, press 8 twice. If still blinking, please call service. CHECK RESET CLOCK MODE POWERFULQUIET FAN SPEED AIR SWING OFF CANCEL ON SET 1 2 3 TIMER OFF/ON AUTO MANUAL 36417528Airflow volume Super High Automatic Powerful Mode Operation COOL / DRY HEAT (for Heat Pump model only) Temperature 3°C lower than set temp. 3°C higher than set temp. Heat Pump Model COOL,DRY, –>15 minutes in advance HEAT, AUTO–>30 minutes in advance Cooling Model COOL,DRY, –>15 minutes AUTO in advance 41 CS-A7CKP CU-A7CKP5 / CS-A9CKP CU-A9CKP5 / CS-A12CKP CU-A12CKP5 Pre-season Inspection Is the discharged air cold/warm? Operation is normal if 15 minutes after the start of operation, the difference between the air intake and outlet vents temperature is: Are the air intake or outlet vents of the indoor or outdoor units obstructed? Are the remote control batteries weak? If the remote control display appears weak, replace the batteries. When the Air Conditioner is Not Used for an Extended Period of Time 1 To dry the internal parts of the indoor unit, operate the unit for 2 - 3 hours using:2 Turn off the power supply and unplug. Note: If the unit is not switched off by the remote control, it will start operating when you plug in (because the unit is equipped with Auto Restart Control). 3 Remove the remote control batteries. Recommended Inspection • After used over several seasons, the unit will become dirty and thus decreases the unit’s performance. Depending on the operation conditions, a dirty unit may produce odour and dust may pollute dehumidification system. Therefore, a seasonal inspection is recommended in addition to regular cleaning. (Consult an authorized dealer). CARE AND MAINTENANCE Cleaning the Indoor Unit and Remote Control • Wipe gently with a soft, dry cloth. • Do not use water hotter than 40°C or polishing fluid to clean the unit. Cleaning the Air Filter (Recommendation:- If the unit is operated in a dusty environment, clean the filters every two weeks, continuous use of this dirty filters will reduce cooling or heating efficiency) 1 Remove dirt using a vacuum cleaner. 2 Wash back of th...
Questo manuale è adatto anche per i modelli :Condizionatori - CS-A9CKP (402.75 kb)
Condizionatori - CS-A12CKP (402.75 kb)