valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
• Failure or negligence in observing these safety precautions could cause fire, electrical shock or personal injury. This symbol (with a white background) denotes an action that is PROHIBITED. 1 SAFETY PRECAUTIONS These symbols (with a blue background) denote actions that are COMPULSORY. INSTALLATION PRECAUTIONS OPERATION PRECAUTIONS This sign warns of risk of death or serious injury. • Do not modify the length of the power cord or use an extension cord. • Do not touch or operate with wet hands. Do not modify or damage the cord. • Do not turn on the unit by inserting the power plug. Do not switch off the unit by pulling out the power plug. • Avoid an extended period of direct airflow. • Do not insert sticks, fingers or other objects into the unit. • Do not try to repair the unit yourself. • Plug in properly before operating and use a specified power cord. • If abnormal conditions (burnt smell, etc) occur, switch off and remove the power plug. WARNING • Do not use the unit for other purposes, than its intended use. • Do not remove the power plug by pulling the cord. • Do not block the air intake and outlet vanes. • Do not splash or direct water at the unit • Do not expose the unit to direct sunlight during operation. • Do not operate the unit without the air filter installed or when the front intake grille has been removed. • Do not place any objects on the unit. • Do not operate any combustion equipment near the unit’s airflow area. • Switch off the breaker and remove the power plug from the socket if the unit will not be operated for a long period. • Pay attention to any damages on the unit caused by extensive usage. • Ventilate the room occasionally where the unit is installed. • Remove the power plug when cleaning the unit. CAUTION 2 AIR CONDITIONER INSTALLATION • Due to the weight of this product, we recommend that you have a helper to assist in the installation. To avoid injury, use the proper method of lifting. Avoid any sharp edges. • Make sure the window frame to be used can properly support this product. • This product must be installed in accordance with all local codes and ordinances. • Do not install the unit in places where inflammable gas, fumes or soot may be generated. POWER SUPPLY • Operate your air conditioner from a stable 115 volt AC supply. • Plug into a separate 15 amp grounded outlet only. • Use of extension cords Avoid using extension cords. If there are no alternatives, ensure that the cord is a UL listed 3-wire grounding type, rated 125 volts with a minimum current-carrying rating of 15 amps, number 14 or heavier wire. • Use a 15 amp time delay fuse or a circuit breaker. • Do not switch off by unplugging the power plug while it is operating. Press the OFF/ON pad to “OFF” before unplugging. This sign warns of injury or damage to property. OPERATION PRECAUTIONS Time Delay Fuse : 15 Amps Rated Voltage : 115V • Socket Type • Line Cord Plug INSTALLATION BOX CONTENTS Sealer 50 g (1.8 oz) (Putty) Type A screw Window sash sealing ribbon Type C screws Type B screws Left side expandable panel Type A screws Type C screws Top angle Window sash foam seal Right side expandable panel Type A Type B Type C (Qty 6) (Qty 5) (Qty 6) SCREW FURNISHED Wood Machine Tapping Screw Screw Screw SUGGESTED TOOL LIST Medium sized screwdriver (#2 Phillips) Tape Measure Pencil Level Knife or Scissor ACCESSORIES NOTE Check that none of the accessories are missing. (6 pcs) (XTN5D25A) (5 pcs) (CWH4580211) (6 pcs) (XTT4D10C) SELECT THE BEST LOCATION (Single or Double hung window) 19–3/16 inches SIDE VIEW Front grille Window 12 inches More than 4 inches Type A screws Type A screw Top sealing ribbon Side sealing ribbon WINDOW REQUIREMENTS • Hot sun rays hitting the outside surface of the cabinet will create considerable heat load. If the outside of the cabinet is exposed to direct sunlight, consider building an awning to shade the cabinet while providing ample area for the heated air to be exhausted from the condenser (both sides) and the top. This unit is designed for installation in standard double hung windows. NOTE The unit may also be installed “through the wall”. You should, however, observe standard carpentry practices and frame the opening without violating local ordinances. INSTALLATION PROCEDURES HOW TO ASSEMBLE THE EXPANDABLE PANELS Top angle Type B screws Type C screws • Attach the top angle to the cabinet using screw type B (3 pcs). • Insert expandable panels to cabinet sides as shown. • Secure the first fold of expansion panel to cabinet using screw type C (3 each). Expandable panel CHASSIS INSTALLATION INTO THE CABINET 1 Remove the rear cabinet screws and save for later use. 2 Slide the chassis out from the cabinet. CABINET INSTALLATION 1 Cut the “Sealing Ribbon” to the proper length, and attach it along the bottom edge of the bottom window sash. 2 To prevent condensation water from dripping inside, the cabinet should be installed level or very slightly tilted to the outside. 3 Secure the cabinet using sc...