valutazioni - 4, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Condizionatori - AJN052NDEHA/EU (1.08 mb)
Condizionatori - AJN052NDEHA/EU (1.26 mb)
Facilità d'uso
If this happens: - The air conditioner stops heating. - The air conditioner will operate automatically in De-ice mode for 10 minutes. - The steam produced on the outdoor unit in De-ice mode is safe. No intervention is required; after about 10 minutes, the air conditioner operates again normally. . The unit will not operate when it starts to de-ice. Fan • Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is warming up. High indoor/outdoor temperatures • If both indoor and outdoor temperatures are high and the air conditioner is running in Heat mode, the outdoor unit’s fan and compressor may stop at times. This is normal; wait until the air conditioner turns on again. Power failure • If a power failure occurs during the operation of the air conditioner, the operating immediately stops and unit will be off. When power returns, the air conditioner will run automatically. Protection mechanism • If the air conditioner has just been turned on after operation stops or being plugged in, cool/ warm air does not come out for 3 minutes to protect the compressor of the outdoor unit. Automatic air flow blade control • If the air conditioner is operating in abnormal conditions (such as operating the air conditioner with windows open or when small capacity indoor unit is installed and operating in a room that is too large) indoor can become very humid when the angle of the air flow blade is small and performance of the product may decrease. When indoor humidity increases, indoor unit will automatically detect it and open the air flow blade in wider angle to make sure that performance of the product is stable. Viewing the parts Main parts Air flow blade Air intake Air filter (under the grille) Display Indicator On/Off operation indicator Removing frost indicator Timer indicator Filter reset indicator Remote control sensor • Your air conditioner and display may look slightly different from the illustration shown above depending on your model. NOTE Cleaning and maintaining the air conditioner Cleaning the exterior Wipe the surface of the unit with a slightly wet or dry cloth when needed. Wipe off dirt of odd-shaped area by using a soft brush. • Do not use Benzene or Thinner. They may damage the surface of the air conditioner and can create a risk of fire. CAUTION Cleaning and maintaining the air conditioner Cleaning air filter and grille Detach the front grille. . Remove the safety clip from panel front. (There are two safety clips between grille and panel base.) . If you want to clean the filter only, you do not have to detach the grille. Follow step 4 and 5 Open the front grille. . Pull both hooks and take the grille downward. Two safety clips are mounted to the front grille to prevent it from dropping. PULLPULL Clean the grille and Air filter with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with running water and dry it in a ventilated area. . For best conditions, repeat every ...
Questo manuale è adatto anche per i modelli :Condizionatori - AJN016NDEHA/EU (871.32 kb)
Condizionatori - AJN020NDEHA/EU (871.32 kb)
Condizionatori - AJN026NDEHA/EU (871.32 kb)
Condizionatori - AJN035NDEHA/EU (871.32 kb)