IT-500 Specifications Model: IT-500M30, IT-500M30R, IT-500M30B, IT-500M30CR, IT-500M30F, IT-500M30CF, IT-500M30CB CPU: Intel® PXA255 Application Processor (400MHz max.) Memory: 32MB RAM; 32MB Flash ROM (FlashFX built in) OS: Microsoft® Windows® CE.NET operating system, English Version Display: 3.5-inch, 240 . 320-dot 2-Way TFT color LCD Laser scanner: Scanned codes: EAN (JAN), UPC, Codabar (NW-7), ITF, CODE39, CODE128, MSI,IATA, Industrial 2 of 5, EAN128 Scanning distance: Within approximately 40-300 mm (15/8"-117/8") Serial Port: Transfer Rate: 115Kbps (max.) IR Port: Interface: IrDA Ver. 1.1 Standard Synchronization: Asynchronous, frame synchronization Transfer Rate: Up to 4Mbps (max.) BluetoothTM Data Communication (IT-500M30B/M30CB) : Protocol: BluetoothTM Specification Ver.1.1 Range: Approximately 3 m (9'103/8") (depends on radio wave conditions and environment) Output: 3dBm max. (PowerClass2) Wireless Communication (IT-500M30R/M30CR/M30F/M30CF): Standard: Complies with IEEE 802.11b Diffusion Modulation: Direct Sequence Spread Spectrum Frequency: 2.400-2.4835 GHz Transmission Rate: Max. 11 Mbps Transmission Distance: 50 m (164'55/8") indoors, 150 m (493'5") outdoors (varies according to usage environment) No. of Channels: 13 (of which 3 channels can be used simultaneously) IT-500M30R/M30CR 11 (of which 3 channels can be used simultaneously) IT-500M30F/M30CF Other Functions: Roaming function between multiple access points Digital Color Camera (IT-500M30CR/M30CF/M30CB): Approx. 350,000 pixels Power Requirements: Power Supply: DT-5123BAT Battery Pack DT-5124LBAT Large-capacity Battery Pack Memory Backup: Rechargeable Lithium Battery (Built-in) Power Consumption: 5A DC, 3.7 to 5V Battery Life: Main battery: IT-500M30/M30B/M30CB Approximately 4 hours (DT-5123BAT)* Approximately 8 hours (DT-5124LBAT)* IT-500M30R/M30CR/M30F/M30UCF Approximately 4 hours (DT-5123BAT)* Approximately 8 hours (DT-5124LBAT)* Approximately 3 hours (DT-5123BAT)** Approximately 7 hours (DT-5124LBAT)** *In the case of Standby (20): Operation (1): Scanning (1) **In the case of Standby (20): Operation (1): Scanning (1): Wireless (1) Memory backup: Data Protection (RAM): 10 minutes (when no power is being supplied by the installed battery) Operating Temperature: –10°C to 50°C (–4°F to 122°F) Operating Humidity: 10% to 80% RH (non-condensation) Drop Durability: 1.0 m (3'31/2") Dust and Water Splash Proof: IEC529, IP54 Standard *When all connectors and covers are closed. Dimensions: Approximately 78(W) . 162(D) . 20(H) mm (3"W . 85.8"D . 17.8"H) (not including projections) Weight: Approximately 260g (9.2oz)(IT-500M30/M30B/M30CB) Approximately 280g (9.9oz)(IT-500M30R/M30CR/M30F/M30CF) Using the Bridge Satellite Cradle (IT-564IOE)/Bridge Basic Cradle (IT-560IOE) The optionally available Bridge Satellite Cradle (IT-564IOE)/Bridge Basic Cradle (IT-560IOE) make it possible to transfer system data and file data between the IT-500 and a computer over an RS-232C connection or USB connection (USB only for the IT-5601OE) (download or upload). You can also use the Bridge Satellite Cradle/Bridge Basic Cradle to charge the battery pack installed on the IT-500. An optionally available wall mount unit lets you mount the Bridge Satellite Cradle/ Bridge Basic Cradle on a wall. General Guide 12 34 Back 5 Top Right Bottom Front Option Required AC Adaptor (AD-S42120A) 7 6 11 12 13 10 9 8 1 USB Port This port accepts connection of a USB cable for connection to a computer for transfer of system data and file data. Use of the USB port requires installation of a special driver on the PC. 2 RS-232C Port (IT-564IOE only) This port accepts connection of an RS-232C cable for connection to a computer for transfer of system data and file data. Use of the RS-232C port requires installation of a special driver on the PC. 3 RS-422C Port (IT-564IOE only) This port is used when connecting to another Bridge Satellite Cradle. 4 AC Adaptor Jack Connect the AC adaptor here. 5 Wall Mount Unit Fastening Plate The holes in this plate accept screws that secure the wall mount unit in place. 6 Terminal Detect Switch This switch detects when the IT-500 is seated correctly on the Cradle. 7 Power Contacts Power is supplied to the IT-500 via these contacts. 8 Power Indicator Lamp This lamp indicates the power status and the mounting status of the IT-500. Off: Power off Green: Power on, IT-500 mounted correctly Red: Power on, IT-500 not mounted 9 Communication Indicator Lamp (IT-564IOE only) This lamp shows that the IT-500 is performing data communication via a serial interface (RS-232C/RS-422). Off: No data communication being performed Green flashing: Data communication in progress Red: Problem with a connection between two Cradles 10 System Status Indicator Lamp This lamp indicates whether the system is operating normally. Regardless of whether or not an IT-500 is mounted this lamp indicates the system status and whether or not a communication operation with the system can be performed....