It contains three tabs: Version Tab Displays the information about the software, operating system, and processor. Device ID Tab Displays the information the terminal uses to identify itself to other devices. It can be important to know this information if the Dolphin terminal is going to be part of a networked system of devices. Device name: Displays the system’s default name. (This is the name used by ActiveSync.) Description: Displays the description of the device ID. Copyrights TabDispla

If you are using an RS-232 cable, ActiveSync will usually set up an RS-232 connection. For more details, see ActiveSync Communication on page 7-8. Connecting the Cables Connect the base to the host workstation or other device by plugging an RS-232 serial cable into the RS-232 Communications Port on the bottom of the base. Plug the other end of the RS-232 serial cable into the correct port on the host RS-232 device. The wiring of your cable depends on whether the other device is set up as a D

For maximum speed, efficiency, and usability, the Dolphin 9500 Series comes equipped with the Intel® X-Scale™ processor and Windows Mobile software. The high-performance system architecture is powered by high-capacity, hot-swappable lithium-ion battery packs, enabling the Dolphin 9500 Series to operate longer in wireless, scan-intensive environments. Designed to provide seamless data and voice connectivity for you and your mobile workers, the Dolphin 9500 Series features an integrated triple-rad

The information in this publication does not represent a commitment on the part of Hand Held Products. Hand Held Products shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into

The default button assignments that appear on the Buttons window are inactive until you enable the HotKeys Power Tool. You must enable the HotKeys Power Tool to activate the button assignments in the Buttons setting. 1. Tap Start > Power Tools. 2. Tap the HotKeys icon once 3. HotKeys is enabled and the button assignments in the Buttons setting are active. 4. Verify the button assignment by tapping the button on the keyboard. For more information about HotKeys, refer to the Dolphin Power Tools Us

Dolphin 7600 Front Panel Scan LED Decode LED 1/4 VGA Touch Screen Display Scan key Microphone Navigation keys Recessed Keyboard Backlight & Power key Dolphin 7600 Back and Side Panel Image Engine Window Stylus Slot Speaker Accessory Attachment Finger Saddle Installed Battery Side Button DC Power Jack Headset Jack IrDA Port Dolphin 7600 Top and Bottom Panels *Pull the plastic tab to remove the plastic film cover over the image engine window before activating the image engine. Memory Card Door *Im

(“Hand Held Products”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Hand Held Products. Hand Held Products shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or conseque

Mating wet components may cause damage not covered by the warranty. 10 - 5 Charging a Spare Battery The base can also charge a second battery while the terminal is positioned in the base. The second battery can be inserted in the battery charging well in back of the terminal connection. Place the battery in the well with the label facing up and toward the back of the unit. Angle the battery as shown. Once the connectors engage, the LED lights. If the LED is red, the unit is charging; if it is gr

For more information, see Sample EXM Files on page 2-2. Start Options Start Options define the required system parameters for a software application to launch. The following values can be entered for the StartOption key, wherever it appears: Option Name The program launches if … Category DISABLED Never, regardless of other startup options specified. None COLDBOOT The terminal has performed a cold boot. Boot type WARMBOOT The terminal has performed a warm boot. TOUCH The terminal has a touch scre

2 - 2 Rev A Dolphin® Power Tools User’s Guide 8/6/08 Use these files as templates to create new EXM files. Opening EZConfig Editor on the Workstation After you complete installation, EZConfig Editor is available on the workstation from the Start menu. Click Start > Programs > Honeywell > EZConfig Editor > EZConfig Editor. Menu Toolbar Menu and Toolbar Options The menu and toolbar at the top of the window contains many options. File Menu Menu Item Description New Creates a new document. There are