valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
WARNING: The gearbox gets very hot after extended periods of use. To avoid burns, do not touch the gearbox until it has been allowed to cool. CULTIVATING 1. Move the cultivator to the work area prior to starting the engine/motor. 2. With the engine/motor running and the tines off the ground, press the throttle trigger to increase the engine speed. 3. Hold trigger handle and assist handle firmly. Slowly lower the cultivator until the tines make contact with the ground. 4. As unit begins cultivating, pull back on the unit so that the tines can penetrate the ground. 5. Once the ground has been broken, continue at a moderate pace until you are familiar with the controls and the handling of the cultivator. 6. Pull the cultivator backwards to improve the depth of cultivation and reduce your effort. 7. To cultivate in confined areas or narrow rows, remove the left and right outer tines (see TINE REPLACEMENT). 6 MAINTENANCEMAINTENANCE WARNING: Always stop unit and disconnect spark plug wire (or disconnect powerhead from power source) before performing maintenance. CHECK FOR DAMAGED OR WORN PARTS Contact an authorized service center for replacement of damaged or worn parts. S Tine Guard - --Discontinue use of cultivator if tine guard is damaged. CHECK FOR LOOSE FASTENERS AND PARTS S Clevis pins S Hitch pin clips INSPECT AND CLEAN UNIT AND DECALS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent. S Wipe off unit with a clean dry cloth. TINE MAINTENANCE WARNING: The tines will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the tines have stopped coasting and disconnect the spark plug (or disconnect powerhead from power source) before performing work on the tines. WARNING: Always replace tines that are bent, warped, cracked, broken, or damaged in any other way. Never attempt to straighten and reuse a damaged tine. Use only specified replacement tines. Wear protective gloves when handling or performing maintenance on the tines to help avoid injury. SERVICEANDADJUSTMENTS TINE REPLACEMENT WARNING: The tines will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the tines have stopped coasting and disconnect the spark plug (or disconnect powerhead from power source) before performing work on the tines. WARNING: Wear protective gloves when handling or performing maintenance on the tines to avoid injury. The tines become very sharp from use. 1. Remove the hitch pin clips and clevis pins. HitchPinClipClevisPin 2. Remove the tines and felt cushions from the shaft. 3. Clean and oil the shaft. 4. Replace the tines and the felt cushions. 5. Repeat previous steps on opposite side. 6. Reinstall clevis pins and hitch pin clips. NOTE: When installed correctly, the hubs on the tines will face each other. The letters “R” stamped on the tines will be on the right side of the cultivator and the letters “L” will be on the left side. 7 STORAGESTORAGE WARNING: Perform the following steps after each use: S Allow attachment and gearbox to cool before storing or transporting. S Position attachment so that any sharp object cannot accidentally cause injury. S Store the attachment in a dry, well ventilated area out of the reach of children. SEASONAL STORAGE Prepare attachment for storage at end of season or if it will not be used for 30 days or more. If your cultivator attachment is to be stored for a period of time: S Clean the entire attachment. S Inspect the tine guard area and clean any dirt or debris that has collected. Inspect the tines; replace tines that are bent, warped, cracked, broken or damaged in any other way. S Lightly oil external metal surfaces. S Check entire attachment for loose screws or nuts. Replace any damaged, worn or broken parts. S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio. LIMITEDWARRANTY Poulan PRO, a division of Husqvarna Consumer Outdoor Products N.A., Inc., warrants to the original consumer purchaser that each new Poulan PRO brand gasoline tool or attachment is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective gasoline product or attachment as follows from the original date of purchase. 2YEARS - --Parts and Labor, when used for household purposes. 90 DAYS - --Parts and Labor, when used for commercial, professional, or income producing purposes. 30 DAYS - --Parts and Labor, if used for rental purposes. This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance or alteration, or the use of accessories and/or attachments not specifically recommended by Poulan PRO for this tool. This warranty does not cover parts that will wear and require replacement with reasonable use during the warranty period. This warrant...
Questo manuale è adatto anche per i modelli :Coltivatori - 545212826 (120.83 kb)