valutazioni - 0, GPA: 0 ( )

Produttore : Philips File Size : 3.04 mb File Nome : Lingua di insegnamento:

This system will automatically cut off the power supply to the appliance in case of overheating. ENGLISH6 Food processor: parts and accessories A) Speed control B) Motor unit C) Built-in saftely lock D) Bowl E) Screw cap (for closing the blender fixing hole when the blender is not in use) F) Tool holder G) Blender jar H) Peg of lid (activates and deactivates the safety switch) I) Lif of bowl J) Feed tube K) Pusher L) Lid of blender jar M) Cover with closable insert storage space N) Slicing insert medium O) Slicing insert fime P) Shredding insert medium Q) Insert holder R) Blade (with protective cover) S) Kneading accessory T) Emulsifying disc U) Spatula Introduction If your appliance suddenly stops running: Pull the mains plug out of the wall socket. Press the 'PULSE / 0' button to switch the appliance off. Let the appliance cool down for 60 minutes. Put the mains plug in the wall socket. Switch the appliance on again. Please contact your Philips dealer or authorised Philips service centre if the automatic thermal cutout system is activated too often. CAUTION: In order to avoid a hazardous situation, this appliance must never be connected to a timer switch. Important . Read the instructions for use carefully and look at the illustrations before using the appliance. . Keep these instructions for use for future reference. . Check if the voltage indicated on the appliance corresponds to the local mains voltage (110-127V or 220-240V) before you connect the appliance. 1 2 3 4 5 . Never use any accessories or parts from other manufacturers or that have not been specifically advised by Philips. Your guarantee will become invalid if such accessories or parts have been used. . Do not use the appliance if the mains cord, the plug or other parts are damaged. . If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. . Thoroughly clean the parts that will come into contact with food before you use the appliance for the first time. . Do not exceed the quantities and preparation times indicated in the tables and recipes. . Do not exceed the maximum content indicated on the bowl or the blender jar, i.e. do not fill beyond the top graduation. . Unplug the appliance immediately after use. . Never use your fingers or an object (e.g. a spatula) to push ingredients down the feed tube while the appliance is running. Only the pusher is to be used for this purpose. . Always unplug the appliance before reaching into the blender jar with your fingers or an object (e.g. a spatula). . Keep the appliance out of the reach of children. . Never let the appliance run unattended. . Never switch the appliance off by turning the lid. Always switch the appliance off by pressing the PULSE / 0 button. ENGLISH . Switch the appliance off before detaching any accessory. . Never immerse the motor unit in water or any other fluid, nor rinse it under the tap. Use only a moist cloth to clean the motor unit. . When you mount the blender jar, the bowl and the screw cap in the proper way, you will hear a click. . The emulsifying disc, the blade and the kneading accessory have to be placed on the toolholder that stands in the bowl. . Remove the protective cover from the blade before use. . Avoid touching the SHARP cutting edges of the blades and inserts, especially when the appliance is plugged in. . If one of the blades get stuck, unplug the appliance before removing the ingredients that are blocking the blades. . Let hot ingredients cool down before processing them (max. temperature 80cC/175cF). . If you are processing a liquid that tends to foam, do not put more than 1 litre into the blender jar to avoid spillage. . Noise level: Lc= 83 dB [A] Note that if both the blender and the bowl have been correctly mounted, only the blender will function. ENGLISH Using the appliance Bowl C C C 1 2 CLICK 1 2 CLICK CLICK . If you want to use the bowl, remove the blender jar and close the fixing hole with the screw cap. All functions that require the use of the bowl will only work if the blender jar has been removed. 1 Mount the bowl on the food processor by turning the handle in the direction of the arrow until you hear a click. 2 Put the lid on the bowl. Turn the lid in the direction of the arrow until you hear a click (this requires some force). Built-in safety lock B The motor unit as well as the lid have been provided with marks. The appliance will only function if the arrow on the motor unit is placed directly opposite the mark on the lid. 1 Make sure that the mark on the lid and the arrow on the bowl are directly opposite each other. The projection of the lid will now cover the opening of the handle. C C C C C 1 2 CLICK Feed tube and pusher 1 Use the feed tube to add liquid and/or solid ingredients. Use the pusher to push solid ingredients down the feed tube. 2 You can also use the pusher to close the feed tube in order to prevent ingredients from escaping d...

Scarica la tua

Per scaricare, digitare 2 cifre :