valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
(2) Push the roller release lever (green color) and lift the roller holder upwards. (3) Carefully install the film cartridge, square end down. Match the arrow symbol to install new cartridge. Note -Make sure that the shutter of the cartridge is closed when installing the cartridge. -Check the position of the top edge of the film before installing the cartridge. It should be aligned with the cutting line of the cartridge. If necessary, cut away any excess film. - Make sure that the film is on the lower roller and that the top edge of the film is placed under the side cutter units. -9 - 10 - (4) Return the roller holder to the original position and press the roller holder lock buttons (purple color) as illustrated. You will hear the roller holder click into place. Press the roller holder further to secure the roller unit. (5) Close the top cover. Turning the machine on/off (1) Connect the plug of the AC adapter into the DC connector. (2) Plug the AC adapter into an electrical outlet. (3) Press the power switch on the control panel to turn it on. The green Start button will light up. If the machine does not respond, check the connection of the AC adapter. Press the power switch again to turn the machine off. WARNING: Do not plug your machine into an electrical outlet until it has been completely assembled. Do not try to disassemble or repair this equipment yourself. Service should be performed by authorized personnel only. Warranties will be voided if the unit is repaired by unauthorized technicians. Never touch the surface of the blades when installing the film cartridge. CAUTION: Do not turn the machine off during the laminating process. The machine should be turned off during operation only in the event of a malfunction. -11 About film rolls There are a variety of different roll film types that have been designed to meet your needs. This machine supports 9.0 inch (A4) or 4.8 inch (A6) width cartridges. Use only Brother authorized film cartridges or film refills. The above mark appears on all packages of authorized film cartridges or film refills that are compatible with the machine. Brother cannot be held responsible for any problem arising from the use of unauthorized supplies. Depending upon the type of film used, this machine turns a variety of documents into professional, self- adhesive stickers and double-sided, coated lamination sheets etc. Please refer to the compatible accessory list packaged with this machine for details. This machine is supplied with a Double Side Lamination Film Cartridge. For other types of film rolls, please contact your local Brother dealer. Film-supply maintenance The colored tapes appear when the film supply begins to run out. Please replace the film roll as soon as you notice these tapes. If the colored tapes appear, replace the film immediately. Please refer to ‘Replacing the film cartridge’ page 11 or ‘Installing/replacing the film roll in the cartridge’ page 13 to replace the films. A standard film roll produces about 30 US letter (A4) size sheets. Please refer to the compatible accessory list for other supply information. Note The colored tapes can be peeled off. -12 Replacing the film cartridge WARNING: Never touch the surface of the blades when installing/replacing the film cartridge. (1) Turn the power off and open the top cover. (2) Push the roller release lever (green color) and lift the roller holder upwards. (3) Remove the film cartridge carefully. -13 (4) Install the new film cartridge carefully. Note -Make sure that the shutter of the cartridge is completely closed when installing the cartridge. -Check the position of the top edge of the film before installing cartridge. It should be aligned with the cutting line of the cartridge. If necessary, cut away any excess film. -Make sure that the film is on the lower roller and that the top edge of the film is placed under the side cutter units. (5) Return the roller holder to the original position and press the roller holder lock buttons (purple color) as illustrated. You will hear the roller holder click into place. Press the roller holder further to secure the roller unit. (6) Close the top cover. (7) Turn the power on. Press the Feed button until you can see the edge of the film to remove any slack from the film. Note -The condition of the currently installed cartridge can be viewed through the window in the top cover. -Store the film cartridge at below 113°F (45°C). -14 Installing/replacing the film roll in the cartridge Cartridges can be recycled by replacing the film roll. Be sure to use Brother-authorized LC film refills only. Refill cartridges using the following instructions: (1) Remove the film cartridge from the machine. Do not grab the shutter when removing the film cartridge from the machine. (2) Open the shutter of the film cartridge by sliding the shutter in the direction of the arrows until it locks into place. Open the film cartridge by gently separating the clear top cover from the gray bottom cover...
Questo manuale è adatto anche per i modelli :Laminator - LX-900 (443.1 kb)