valutazioni - 5, GPA: 3.8
(
)
)
|
Facilità d'uso
The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. SAVE THESE INSTRUCTIONS Work area safety If operating the power tool in damp locations is unavoidable a Ground Fault Keep work area clean and well lit. Circuit Interrupter (GFCI) must be used to Cluttered or dark areas invite accidents. supply the power to your tool. GFCI and Do not operate power tools in explosive personal protection devices like electrician’s atmospheres, such as in the presence of rubber gloves and footwear will further flammable liquids, gases or dust. Power enhance your personal safety. tools create sparks which may ignite the dust or fumes. Personal safety Keep children and bystanders away while Stay alert, watch what you are doing and operating a power tool. Distractions can use common sense when operating a cause you to lose control. power tool. Do not use a power tool while you are tired or under the influence of Electrical safety drugs, alcohol or medication. A moment of Power tool plugs must match the outlet. inattention while operating power tools may Never modify the plug in any way. Do not result in serious personal injury. use any adapter plugs with earthed Use safety equipment. Always wear eye (grounded) power tools. Unmodified plugs protection. Safety equipment such as dust and matching outlets will reduce risk of mask, non-skid safety shoes, hard hat, or electric shock. hearing protection used for appropriate Avoid body contact with earthed or conditions will reduce personal injuries. grounded surfaces such as pipes, Avoid accidental starting. Ensure the radiators, ranges and refrigerators. There switch is in the off-position before is an increased risk of electric shock if your plugging in. Carrying power tools with your body is earthed or grounded. finger on the switch or plugging in power Do not expose power tools to rain or wet tools that have the switch on invites conditions. Water entering a power tool will accidents. increase the risk of electric shock. Remove any adjusting key or wrench Do not abuse the cord. Never use the cord before turning the power tool on. A wrench for carrying, pulling or unplugging the or a key left attached to a rotating part of the power tool. Keep cord away from heat, oil, power tool may result in personal injury. sharp edges or moving parts. Damaged or Do not overreach. Keep proper footing entangled cords increase the risk of electric and balance at all times. This enables shock. better control of the power tool in unexpected When operating a power tool outdoors, situations. use an extension cord suitable for Dress properly. Do not wear loose outdoor use. Use of a cord suitable for clothing or jewelry. Keep your hair, outdoor use reduces the risk of electric clothing and gloves away from moving shock. parts. Loose clothes, jewelry or long hair can Do not use AC only rated tools with a DC be caught in moving parts. power supply. While the tool may appear to If devices are provided for the connection work, the electrical components of the AC of dust extraction and collection facilities, rated tool are likely to fail and create a ensure these are connected and properly hazard to the operator. used. Use of these devices can reduce dust- related hazards. -2 SM 1619X00459 1-05 12/8/04 9:19 PM Page 3 Keep handles dry, clean and free from oil Keep cutting tools sharp and clean. and grease. Slippery hands cannot safely Properly maintained cutting tools with sharp control the power tool. cutting edges are less likely to bind and are easier to control. Power tool use and care Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different ...