valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
AVOID ACCIDENTAL STARTING Work Area Make sure the switch is in the “OFF” position before plugging in tool. KEEP CHILDREN AWAY Do not let visitors contact tool or extension cord. All visitors NEVER STAND ON TOOL OR ITS STAND should be kept away from work area. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted. Do not store materials KEEP WORK AREAS CLEAN on or near the tool such that it is necessary to stand on the Cluttered areas and benches invite accidents. tool or its stand to reach them. MAKE WORKSHOP CHILD-PROOF CHECK DAMAGED PARTS With padlocks, master switches. Before further use of the tool, a guard or other part that is AVOID DANGEROUS ENVIRONMENTS damaged should be carefully checked to ensure that it will Don’t use power tools in damp or wet locations. Keep work operate properly and perform its intended function. Check area well lit. Do not expose power tools to rain. Do not use for alignment of moving parts, mounting and any other con- tool in presence of flammable liquids or gases. ditions that may affect its operation. A guard or other part that is damaged should be properly replaced. WARNING! All repairs, electrical or mechanical, should Personal Safety be attempted only by trained repairmen. Contact the nearest Bosch Factory Service Center, KNOW YOUR POWER TOOL Authorized Service Station or other competent repairRead and understand the owner’s manual and labels affixed service. to the tool. Learn its application and limitations as well as the specific potential hazards peculiar to this tool. Use only Bosch replacement parts; any DON’T OVERREACH WARNING! WARNING! others may create a hazard. Keep proper footing and balance at all times. STAY ALERT Use only accessories that are Watch what you are doing. Use common sense. Do not op recommended by the manufacturer forerate tool when you are tired. Do not operate while under your model. Accessories that may be suitable for one medication or while using alcohol or other drug. tool, may become hazardous when used on another tool. DRESS PROPERLY Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non-skid footwear are Tool Use recommended when working outdoors. Wear protective hair covering to contain long hair. DON’T FORCE TOOL It will do the job better and safer at the rate for which it was USE SAFETY GOGGLES designed. Also face or dust mask if cutting operation is dusty, and ear plugs during extended periods of operation. USE THE RIGHT TOOL Don’t force small tool or attachment to do the job of a GUARD AGAINST ELECTRIC SHOCK heavy-duty tool. Don’t use tool for purpose not intended — Prevent body contact with grounded surfaces. For example: for example; don’t use circular saw for cutting tree limbs or pipes, radiators, ranges, refrigerator enclosures. logs. DISCONNECT TOOL FROM POWER SOURCE SECURE WORK When not in use, before servicing, when changing blades, Use clamps or a vise to hold work. It’s safer than using your bits, cutters, etc. hand and it frees both hands to operate the tool. KEEP GUARDS IN PLACE DIRECTION OF FEED In working order, and in proper adjustment and alignment. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only. REMOVE ADJUSTING KEYS AND WRENCHES When not in use, before servicing, when changing blades, NEVER LEAVE TOOL RUNNING UNATTENDED bits, cutters, etc. Turn power off. Don’t leave tool until it comes to a complete stop. “SAVE THESE INSTRUCTIONS” 2. Additional Safety Rules KICKBACKS AND POSSIBLE INJURY Tool Care CAN USUALLY BE AVOIDED BY: DO NOT ALTER OR MISUSE TOOL These tools are precision built. Any alteration or modification not specified is misuse and may result in dangerous conditions. AVOID GASEOUS AREAS Do not operate electric tools in gaseous or explosive atmospheres. Motors in these tools normally spark, and may result in a dangerous condition. MAINTAIN TOOLS WITH CARE Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean and free from oil and grease. WARNING! Before connecting the tool to a power source (receptacle, outlet, etc.), be sure voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in serious injury to the user — as well as damage to the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful to the motor. WARNING! For your own safety, do not operate your table saw until it is completely assembled and installed according to the instructions … and until you have read and understood the following: 1.General Safety Rules. . . . . . . . . . . . . . . . . . 2–5 2.Double In...