valutazioni - , GPA:
(
)
)
Produttore : Delta
File Size : 727.66 kb
File Nome : 1995e321-0e4a-4d51-9255-fd4ed533676c.pdf
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
Facilità d'uso
1087755 DATED 8-1-73 50-802 STAND FOR 34-570 9 HOMECRAFT SAW INSTALLATION 1- Remove stand from carton, 2.“' Assemble one short top brace (A) and one long bottom brace (B) ter panel (C), as shown in Fig. 1, using the eight carriage, bolts, flat washers, lockwashers and hex -nuts supplied. - The bottom of the panel (C) can be determined 'by the holes (D) for the: Accessory 50-118 Retractable Caster Attachment* IMPORTANT: 'The top brace (A) must be assembled to the panel (C) with the lip' (E) of the panel positioned on top of the brace as shown« 3* . Assemble the remaining top and bottom braces (F) and (G) to the panel (C) Fig, 2, in'the same manner. 4, Assemble the four braces to the remaining panel (H). as shown in Fig. 2. 5. The saw can now be mounted to the stand. The front of the saw can be toward either panel (C) or ■(H) Fig, 2. NOTE: To mount the saw to the stand, use the four hex head screws, flat washers, external tooth lockwashers and hex nuts (items 8, 9, 10 and 11) of the parts 'drawing. IF DURING OPERATION THERE IS ANY TENDENCY. 'FOR THE TOOL TO TIP OVER, SLIDE OR'WALK ON SUPPORTING SURFACE, THE STAND OR BENCH MUST BE SECURED TO THE FLOOR. Fig. 2‘ Replacement Parts Ref. Part Description No. No. Cat. #50-802 Stand Ass’y. Consisting of: 1 1087508 Front and Rear Panel* 2 1087507 Bottom Brace 3 1087509 Top Brace 4 SP-834 5/16-18 X 3/4" Carriage Bote 5 SP-1604 5/16 X 3/4 X 1/16" Washer 6 SP-1704 3/8" Split Lockwasher 7 SP-1030 5/16”-18 Hex Jam Nut 8 SP-1034 l/4"-20 Hex Nut 9 SP-1757 1/4“ External Tooth Lockwasher 10 SP-1603 1/4 X 9/16 X 3/64" Wash« 11 SP-625 1/4-20 X 3/4" Hex Hd. Screw...
Questo manuale è adatto anche per i modelli :Jig Saw e - 34-570 (727.66 kb)