valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
Underwriters Laboratories. This symbol designates This symbol designates that this tool is listed by that this tool is listed by Underwriters Laboratories, the Canadian Standards and listed to Canadian Association. Standards by Underwriters Laboratories. -5 This symbol designates that this tool complies to NOM Mexican Standards. Model number 1590EVS & 1591EVS Voltage rating 120 V 50 - 60Hz Amperage rating 6.4 A No load speed n0 500-2,800/min Stroke length 1" Wood 5-3/8" Aluminium 3/4" Steel 3/8" Stainless steel 1/8" -6- Functional Description and Specifications Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally. ! WARNING Jigsaws 6 VACUUM HOSE (Not included, available as accessory) VACUUM HOSE ADAPTER TUBE (Not included, available as accessory) DUST BLOWER LEVER BLADE ORBIT SELECTOR LEVER PRECISION CONTROL BUTTON VARIABLE SPEED CONTROL DIAL BLADE EJECTOR LEVER DUST SHROUD (Not included, available as accessory) NON-MARRING OVERSHOE “LOCK-ON” BUTTON (Model 1590EVS only) TRIGGER SWITCH BLADE FOOTPLATE INTAKE VENTILATION OPENINGS FIG. 1 SLIDE ON-OFF SWITCH (Model 1591EVS only) Assembly BLADE INSTALLATION AND REMOVAL This jigsaw is equipped with the Bosch “One Touch” tool-less blade changing system. This system makes changing blades simple and fast. Insert the saw blade (teeth in cutting direction) until it latches in the plunger (Fig. 2.) When inserting the saw blade, the back of the blade must rest in the groove of the guide roller (Fig. 3). Note: If the saw blade cannot be inserted into the plunger, the slots of the blade holder are not positioned as shown, or because the precision control guides are shut, push the blade ejector lever briefly to the front and release (Fig. 4). To change the saw blade, push the ejector lever to the center stop; this releases the precision control guides and ejects the saw blade (Fig. 4). When changing the blade, tool should be held so that the blade is safely ejected. PRECISION CONTROL The precision control guides were designed to improve vertical cut accuracy of the saw blade. To use this feature simply press the precision control button to close the guides for precision control. The saw blade is now guided laterally by the precision control guides which enables precision cuts. The precision control guides can be used for all applications, including bevel cuts. Precision control is recommended for cuts in thick wood, as the cutting angle is maintained and run-out of the saw blade is reduced. Refer to Operating Tips for more information. DUST EXTRACTION (Not included, available as accessory) A vacuum hose adapter tube and dust shroud (optional accessory) can be attached for dust and chip extraction. The vacuum hose adapter tube serves as the connector to the vacuum hose. ATTENTION: The vacuum hose adapter must only be used with dust shroud when connected to a vacuum. To use this feature, attach vacuum hose adapter tube to footplate. When inserting the adapter tube into the footplate be sure that the plastic post of the adapter tube engages into the corresponding hole on the housing (Fig. 5). FIG. 2 PRECISION CONTROL GUIDES BLADE PRECISION CONTROL BUTTON GUIDE ROLLER BLADE PRECISION CONTROL GUIDES FIG. 4 BLADE EJECTOR LEVER PRECISION CONTROL GUIDES PLUNGER FIG. 3 -7- ATTACHING NON-MARRING OVERSHOE Your tool is equipped with a protective plastic overshoe that protects finer surfaces. To attach, hook overshoe over front of metal footplate and snap into place at rear of footplate (Fig. 7). ANTI-SPLINTER INSERT To minimize splintering of the top surface of the material being cut, place the anti-splinter insert in the blade opening of the footplate (Fig. 7). The anti-splinter insert can be inserted into the footplate in two positions. For narrow saw blades, place the insert completely to the front of the opening (Fig. 8). For wider saw blades, place the insert completely to the rear of the opening (Fig. 9). Note: This insert will only work with blades that have ground sides such as T301CD, T101B, T101D, and T101DP. For vacuuming, a Bosch Air Sweep vacuum hose (optional accessory) can be directly connected to the vacuum hose adapter tube (Fig. 6). For maximum vacuum dust pick up, dust shroud must be attached. FOOTPLATE ANTI-SPLINTER INSERT NON-MARRING OVERSHOE FIG. 7 -8- FIG. 5 FIG. 8 FIG. 9 PLASTIC POST FIG. 6 Operating Instructions PLUNGER SPEED The jigsaw cutting speed or stroke rate required depends on the material being cut, the type of blade being used, and the feed rate preferred by the operator. The best speed for a particular application is largely determined by experience though as a general rule, slower speeds are for denser materials and faster speeds for softer materials. Note that when the jigsaw is used at low speed settings for an extended length of time, the motor temperature will rise due to slower speeds of the internal cooling f...
Questo manuale è adatto anche per i modelli :Jig Saw e - 1590EVS (2.68 mb)