valutazioni - 2, GPA: 4.5
(
)
)
|
Foto e specifiche Hitachi C10FCH |
Facilità d'uso
6. NEVER FORCE THE TOOL. It will do the job better and more safely if it is operated at the rate for which it was designed. 7. ALWAYS USE THE RIGHT TOOLS. Never force a tool or an attachment to do a job for which it was not designed. 8. ALWAYS WEAR PROPER APPAREL WHEN WORKING WITH THE TOOL. Never wear loose clothing, gloves, neckties, rings, bracelets or other jewelry which may get caught in the moving parts. Always wear non-slip footwear, preferably with steel toes. Wear protective hair covering to contain long hair. English 9. ALWAYS USE EYE PROTECTION WHEN WORKING WITH THE TOOL TO PREVENT EYE INJURY. Ordinary eyeglasses do not provide adequate protection because the lenses are not made of safety glass. Also, use a face mask for additional safety and wear a dust mask if the cutting operation produces dust. 10. ALWAYS SECURE THE WORKPIECE TO THE FENCE OR THE TABLE. Use clamps or a vise to hold the workpiece in place. It is safer than using your hand and it frees both hands to operate the tool. 11. NEVER OVERREACH. Always keep proper footing and balance when working with the tool. 12. ALWAYS MAINTAIN TOOLS WITH CARE. Always keep tools sharp and clean for the best and safest performance. Always follow instructions for lubricating the tool and for changing accessories. 13. ALWAYS DISCONNECT THE TOOL before servicing and before changing blades or other accessories. 14. NEVER RISK UNINTENTIONAL STARTING WHEN PLUGGING IN THE TOOL. Always confirm that the switch is in the OFF position before inserting the power plug into the receptacle. 15. ALWAYS USE RECOMMENDED ACCESSORIES ONLY WHEN OPERATING THIS TOOL. Consult this instruction manual for descriptions of recommended accessories. To avoid personal injuries, use only recommended accessories in conjunction with this tool. 16. NEVER STAND ON THE TOOL. Prevent serious injury by not tipping the tool and by not risking unintentional contact with the saw blade. 17. ALWAYS CHECK FOR DAMAGED PARTS BEFORE USING THE TOOL. Always check the guard and all other components for damage before using the tool to assure that they will function properly. Check all moving parts for proper alignment, freedom from binding and other conditions that might affect proper operation. Always repair or replace any damaged guards or other damaged components before using the tool. 18. ALWAYS CONFIRM THE ROTATION DIRECTION OF THE BLADE BEFORE USING THE TOOL. Always feed work into the tool against the rotation direction of the blade in order to prevent possible injury. 19. NEVER LEAVE THE TOOL RUNNING WHILE UNATTENDED. TURN POWER OFF. Do not leave tool until it comes to a complete stop. Always turn the power off when the tool is not in use. Always unplug the power cord when the tool is not in use. 20. This tool was not designed to be used for mass-production applications and should not be used in mass-production environments. 21. When servicing this tool, use only authorized replacement parts. 22. Apply 120 volts AC only to this tool. Applying the wrong voltage or applying DC power can cause the POWER TOOL to operate improperly and cause serious personal injury or damage to the tool. 23. Never raise the saw blade from the workpiece until it has first come to a complete stop. 24. Always use outboard stands to provide support for long workpieces that overhang the table of the slide compound saw. 25. Always return the carriage to the full rear position after each crosscut operation in order to reduce the risk of injury. 26. POLARIZED PLUGS To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Specific Safety Rules for Use of this Power Tool WARNING: The following specific operating instructions must be observed when using this POWER TOOL in order to avoid injury: DO’s ALWAYS OBSERVE THE FOLLOWING RULES TO ASSURE SAFE USE OF THIS TOOL: 1. Review this Manual and familiarize yourself with the safety rules and operating instructions for this POWER TOOL before attempting to use it. English 2. Always confirm that the POWER TOOL is clean before using it. 3. Always wear snug-fitting clothing, non-skid footwear (preferably with steel toes) and eye protection when operating the POWER TOOL. 4. Always handle the POWER TOOL carefully. If the POWER TOOL falls or strikes against a hard object, it might become deformed or cracked or sustain other damage. 5. Always cease operating the saw at once, if you notice any abnormality whatsoever. 6. Always confirm that all components are mounted properly and securely before using the tool. 7. When replacing the saw blade, always confirm that the rpm rating of the new blade is correct for use on this tool. 8. Always shut off the power and wait for the saw blade to completely stop ro...
Questo manuale è adatto anche per i modelli :Jig Saw e - C 10FCE (1.62 mb)