valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood. IMPORTANT SAFEGUARDS People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. WARNING: Handling the power cord on this product may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. GENERAL SAFETY RULES – FOR ALL ELECTRIC POWER TOOLS READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFIC SAFETY RULES AND/OR SYMBOLS Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator. IMPORTANT SAFETY RULES FOR JIGSAWS Always wear safety goggles or other approved eye protection when using this tool. Always use an appropriate dust mask or respirator during operations where dust can be generated. To reduce exposure to these chemicals always work in a well ventilated area. Use approved safety equipment and dust masks that are specially manufactured to filter out microscopic particles. Hold the Jigsaw by the insulated gripping surfaces when performing an operation where the blade may contact hidden wiring or the tool power cord. Contact with a "live" electrical wire will make exposed metal parts of the jigsaw "hot" and create a potential for electrical shock to the operator. Do not cut into existing walls or other blind areas where existing electrical wires may be present. If this situation is necessary, remove all fuses and/or turn all circuit breakers off in the work area. After cuts have been completed in the blind areas, inspect to ensure that no electrical wire was cut or nicked before reinstalling fuses and/or engaging circuit breakers. Never leave the jigsaw with the trigger left in the locked "ON" position. Before plugging in the jigsaw, inspect to make sure the trigger lock is in the "OFF" position. Accidentally plugging the jigsaw in with the trigger lock engaged can result in premature starting of the tool, which can cause damage to the tool and/or serious injury to the operator. Keep hands away from the cutting area. Do not reach under material being cut while the jigsaw is running. Serious injury could occur. Always turn the jigsaw "OFF" before inspecting the cutting area. Do not use dull or damaged blades with the jigsaw. Bent or damaged blades can break or cause a kickback resulting in serious injury to the operator. Dull blades will cause the jigsaw to perform improperly and may damage the tool. Before starting to cut with the jigsaw, turn it "ON" and allow the blade to come to full speed. The jigsaw can chatter or vibrate if the blade speed is too slow at the start of the cut. This can cause the jigsaw to kickback and damage the work area or cause injury. Always secure working material before attempting to make a cut with the jigsaw. Never hold the material with your free hand or across your legs. Small or thin material may flex or vibrate causing loss of control and possible injury. Remove adjusting keys or wrenches before turning the power tool “ON”. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat or hearing protection must be used for appropriate conditions. TOOL USE AND CARE Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and saf...