valutazioni - 5, GPA: 4.6
(
)
)
|
Facilità d'uso
Liquid Propane Gas Model Also Available: ZGU36L4RYSS–4 gas burners and grill. Installation Options: This cooktop can be installed in standard 24" or deeper 25" cabinets. • In 24" deep cabinets, the front of the cooktop will project approximately 1-7/8" beyond the front of the countertop. • In 25" deep cabinets, the cooktop will be flush with the front of the countertop • The stainless surface of the cooktop will be 1/2" higher than adjacent countertop. Accessory Requirements: All models require the installation of a backguard. A backguard should be ordered at the same time as the cooktop. Both should be on site before cabinetry has been installed. Order one backguard: ZXC1B36YSS–1-1/2" high backguard (required for island installations) ZXC12B36YSS–12" high backguard ZXC22B36YSS–22" high backguard with warming shelf (2 piece) ZXC22B36YSS ZXC12B36YSS ZXC1B36YSS For answers to your Monogram,® GE Profile,™ GE, Hotpoint and RCA appliance questions, call GE Answer Center® service, 800.626.2000. Listed by R UL Underwriters Laboratories Monogram. ™ ZGU36N4RYSS—36" Professional Gas Cooktop Dimensions and Specifications (in inches) 36" Wide Hood 30" Min. 36" Max. 18" Min. 12" Min. to Combustible Material Each Side 36" Min. to Combustible Material From Cooking Surface 13" Max. 7" 22-3/4" Min. Electric/Gas Supply 34-7/8"1/2" 8" 2-1/2" 2" Cooking Surface Low Back High Shelf 26-5/8" 10"2-1/2" 21-1/4" 12" 36" Min. to Combustibles Island Trim 12" Min. to Combustibles Without Backguard 36" Min. to Combustibles Advance Planning: Refer to “Dimensions and Clearances” for appropriate placement and necessary clearances when planning the installation. • Cabinetry cannot be installed directly above the cooktop. • This cooktop requires the installation of a vent hood, 30" to 36" above the surface. –The vent hood must be at least 24" deep. –The vent hood must be the same width as the cooktop. –The 36” vent hood must provide at least 600CFM and up to 800CFM. • Working areas adjacent to the range should have 18" minimum clearance between countertop and cabinet bottom. • Clearance between cooktop and side wall or combustible material must be at least 12" on each side. • This cooktop requires 8" free space below the countertop. • If the cooktop is installed in an island: –Allow 12" min. clearance at the back to combustible materials. –Allow 36" min. above the cooking surface to combustible materials. • Installation must conform with local codes. In the absence of local codes, the gas cooktop must comply with the National Fuel Gas Code, ANSI Z223.1, latest edition. A.G.A. approved For answers to your Monogram,® GE Profile,™ GE, Hotpoint and RCA appliance questions, call GE Answer Center® service, 800.626.2000. Listed by R UL Underwriters Laboratories Revised 7/97 Monogram. ™ ZGU36N4RYSS—36" Professional Gas Cooktop Dimensions and Specifications (in inches) 8" 2-1/2" 1/2" 34-7/8" 22-3/4" Monogram FRONT REAR FRONT REAR FRONT REAR 26-5/8" 8-7/16" 35-7/8" Counter Sunk Screws Adjac...
Questo manuale è adatto anche per i modelli :Jig Saw e - MONOGRAM ZGU36L4RYSS (85.18 kb)