Log:
Scaricare : 7   File Size : 636 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

When properly connected, red light will turn on. ¦ Normally, the yellow and green lights on the charger will come on. This indicates charger is in control charge mode and should switch to fast charge mode within 5 minutes. When charger is in fast charge mode the red light will come on. If after a period of 15 minutes the yellow and green lights remain on, remove the battery pack, wait 1 minute and reinsert battery pack in charger. If the yellow and green lights continue to remain on an additiona

Scaricare : 8   File Size : 265 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

Failure to do so could result in possible serious personal injury. BLADE WRENCH HOLDER A blade wrench (5 mm hex key) is packed with your saw. A convenient feature on your saw is the wrench holder. This is a slot located on the bottom portion of the saw handle. It is convenient for storing the wrench when it is not being used. BLADE SELECTION Your saw is equipped with a "lock-off" button which reduces the possibility of accidental starting. The lock-off button is located on the handle above the s

Scaricare : 5   File Size : 614 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

ASSEMBLY UNPACKING This product has been shipped completely assembled. nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. nInspect the tool carefully to make sure no breakage or damage occurred during shipping. nDo not discard the packing material until you have carefully inspected and satisfactorily operated the tool. nIf any parts are damaged or missing, please call1-800-525-2579 for assistance. PACKING LIST Reciprocat

Scaricare : 4   File Size : 618 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. WARNING: The double insulated system is intended to protect the user from shock resulting from a break in the tool's internal wiring. Observe all normal safety pre- cautions to avoid electrical shock. Important: Servicing of a tool with double insulation requires extreme care and knowledge of the system and should be performed only by a qual

Scaricare : 0   File Size : 251 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

Make sure saw blade is clear of any foreign material and that power cord and extension cord are out of the blade path. Be sure material to be cut is held firmly. Small work pieces should be securely clamped in a vise or with clamps to the work bench or table. Mark the line of cut clearly. Depress the trigger switch starting the cutting action, set the base assembly against the work, then move the blade into the work. DO NOT FORCE. Use only enough pressure to keep the saw cutting. Let the blade a

Scaricare : 0   File Size : 1 mb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

Replacement blades for this saw are available from your nearest Ryobi dealer. Page 6 OPERATION OPERATION TO INSTALL BLADES See Figure 3. ¦ UNPLUG YOUR SAW. WARNING: Failure to unplug your saw could result in accidental starting causing serious injury. ¦ Remove the 5/32 in. allen wrench provided with this saw from allen wrench holder. NOTE: Allen wrench holder is located in bottom portion of saw handle. See Figure 1. ¦ Loosen the blade clamp screw enough to permit the saw blade to be inserted bet

Scaricare : 0   File Size : 662 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

PARTS LIST Key Part No. Number Description Quan. Key Part No. Number Description Quan. 1 990496-016 Cord .................................................................... 1 2 968775-001 Screw (M3 x 7 Fil. Hd.) ....................................... 2 3 617966-028 Screw (#8-10 x 1/2 in. Pan Hd.) ......................... 1 4 617966-030 Screw (#8-10 x 5/8 in. Pan Hd.) ....................... 10 5 973703-001 Logo Plate .......................................................... 1 6 617966-032 Sc

Scaricare : 0   File Size : 283 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

VARIABLE SPEED See Figure 2. Your reciprocating saw has a variable speed control selector designed to allow operator control and adjustment of speed and power limits. The speed and power of your saw can be increased or decreased by rotating the variable speed control selector in the direction of the arrows shown in figure 2. NOTE: Hold your saw in normal operating position and turn the variable speed control selector clockwise to increase the speed and power of your saw. Turn counterclockwise to

Scaricare : 2   File Size : 107 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

It runs through normal 120-V alternating current power. When on, the saw blade has a stroke of 19/16 inches moving at a maximum speed of 2800 strokes per minute. The entire assembly, including the removable blade, weights 6.3 pounds. The saw has 6 speed settings, a trigger which determines whether the saw is on or off, and interchangeable blades. After completing the model and assembling it, we will attempt to animate several aspects of the construction and functions of the saw. Finally, we will

Scaricare : 0   File Size : 538 kb   Produttore : Ryobi  
Categoria : Jig Saw e
@name

WARNING: Do not allow familiarity with your circular saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. OPERATION OPERATION LED FUNCTION OF CHARGER 1400667 See Figure 2. LED WILL BE LIGHTED TO INDICATE STATUS OF CHARGER AND BATTERY PACK: ¦ Red LED Lighted = Fast Charging Mode. ¦ Green LED Lighted = Slow Charging Mode and Fully Charged Battery Pack. ¦ Yellow and Green LED Lighted = Soft Start Mode, or After 1/2 Hour Equals Hot or Defect





categorie