valutazioni - 3, GPA: 3.7 ( )

Produttore : Kenwood File Size : 6.31 mb File Nome : Lingua di insegnamento:

Twist to lock. (DVolume control / Power switch The volume control and power switch are combined. Rotating the control clockwise will turn ON the transceiver. Advancing the control further clockwise will increase the volume. (3)SQL control This control is used to select the desired Squelch threshold level. ®MHz key This key is used to select the tuning rate of the Tuning control. When the MHz indicator is lit, the Tuning 12 control will cause the transceiver to increase or decrease in 1 MHz steps. Press and hold the key for longer than 1 second to initiate MHz scan. Pressing the key after scan has been initiated will cause scan to stop. Pressing the key within 10 seconds of pressing the F key will allow you to change the frequency step. Turn the power on while pressing this key to initiate the Automatic Memory Initialization. Automatic storage will then begin from the frequency that appeared in the display before the power was turned off. See section 4-4-8 for additional information on this function. (DVFO key This key is used to return to VFO operation after operating in the memory channel or CALL channel mode. The Tuning control will increase or decrease frequency in accordance with the VFO indicator. Press and hold the key for longer than 1 second to initiate VFO scan. Pressing the key after scan has been initiated will cause scan to stop. Pressing the key within 10 seconds of pressing the F key will copy the memory channel or call channel data to the VFO. This allows you to change parameters or that channel without actually changing the data that has been stored in memory. Pressing the F key for longer than 1 second and then pressing the VFO key will initiate VFO or Memory scan. Pressing the key after scan has been initiated will cause scan to stop. If you press and hold the VFO key while you turn on the POWER switch you will reset the microprocessor’s VFO memory, without destroying the memory channel or call channel data. (DMR key This key is used to the select MR (Memory Recall) mode from the VFO mode. The Tuning control can then be used to select the desired memory channel. Press and hold the key for longer than 1 second to initiate memory channel scan. Pressing the key after scan has been initiated will cause scan to stop. Pressing the key within 10 seconds of pressing the F key will store the displayed data into memory. In the memory channel mode pressing the F key for longer than 1 second and then pressing the MR key will cause the memory channel to be skipped during memory channel scan. If you press and hold this key while you turn on the POWER switch you will clear all the memory channels. (DCALL key Press this key to activate the call channel function. Press and hold the key for longer than 1 second to initiate call channel scan. Pressing the key after scan has been initiated will cause scan to stop. Pressing the key within 10 seconds of pressing the F key will store the displayed data into call channel. Pressing the F key for longer than 1 second and then pressing the CALL key will initiate V / M / C scan. See section 4-5-9 for additional information on this function. Pressing the key after scan has been initiated will cause scan to stop. If you press and hold this key while you turn on the POWER switch you will be able to turn the AUTOMATIC POWER OFF function ON or OFF. (DON AIR indicator ON whenever the transceiver is in the transmit mode. (DT.ALT key This key is used to activate the Tone Alert function. Pressing the key within 10 seconds of pressing the F key will turn the BEEP function OFF or ON. Pressing the F key for longer than 1 second and then pressing the T.ALT key will cause radio to toggle the hold / resume mode between Time Operated scan and Carrier Operated scan. 13 If you press and hold this key while you turn on the POWER switch you will be able to turn the BATTERY SAVER function ON or OFF. ©Tuning control Rotate this control clockwise to increase the frequency and counterclockwise to decrease the frequency. This control is also used to select the desired memory channel and the scan direction. LCD display © DTSS CTCSS WJ3E%BB ® ©(g)(0) ®- H + Displays the selected transmitter offset direction. When neither indicator is ON the transceiver is in the Simplex mode. When both indicators are ON the transceiver is in the Split Channel mode. (D R indicator 14 This indicator is ON when the Reverse function is on. (DDTSS indicator This indicator is ON when the DTSS function is active. ®CTCSS indicator T: This indicator is ON when the Tone Encode function is active. CTCSS: This indicator is ON when the Tone Decode function is active. (DT. ALT indicator This indicator is ON when the Tone Alert system is active. The indicator will flash when a signal is received. (DMemory channel indicator This indicator is used to show the selected memory channel number. (DMemory indicator This indicator lights during Memory Recall mode, and flash...

Scarica la tua

Per scaricare, digitare 2 cifre :